We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round red LED panel light with nylon body and brass nut 8mm mount

Dayton

Dayton 22NY75 Flush Panel Light Red 24 V AC/DC 8mm

SKU CH-VHSH-SBPTD

Red LED panel indicator mounts in an 8 mm hole, runs on 24 V AC/DC and draws 12 mA with a 25,000-hour rated life

  • Engine BrandDAYTON
  • Engine Size8mm Mounting dia
  • Red LED indicator for clear status visibility
  • 24 V AC/DC operation suits industrial control circuits
  • 8 mm mounting diameter fits standard panel cut-outs
  • 25,000-hour average life reduces replacement frequency
  • UL Listed and IP40 rated for compliant indoor use

Flush Panel Light for Industrial Panels

The Dayton 22NY75 is a round LED indicator designed for 8 mm panel cut-outs. It operates on 24 V AC or DC and draws 12 mA. The nylon body, polycarbonate lens and brass nut suit control panels, machinery consoles and automotive electrical enclosures.

Sustained Operation Characteristics

Rated for an average life of 25 000 hours, the light maintains output during continuous duty. The IP40 rating protects against solid objects larger than 1 mm but offers no water resistance. UL listing confirms compliance with applicable safety standards for industrial environments.

Decisive Specification — 8 mm Mounting Diameter

The 8 mm mounting diameter and panel thickness range of 0.024 in to 0.055 in determine fit. Buyers whose panels require a different cut-out size or thicker mounting surfaces cannot use this indicator. The 0.11 inch male quick-disconnect terminals complete the installation requirements.

Highlights

  • Red LED indicator for clear status visibility
  • 24 V AC/DC operation suits industrial control circuits
  • 8 mm mounting diameter fits standard panel cut-outs
  • 25,000-hour average life reduces replacement frequency
  • UL Listed and IP40 rated for compliant indoor use

Specifications

Engine BrandDAYTON
Engine Size8mm Mounting dia

Questions about this item

How much heat or noise does the 24 V AC/DC LED produce when it runs continuously?

The LED draws 12 mA at 24 V AC/DC, so heat output is minimal and the solid-state design creates no audible noise during all-day operation.

What wiring or connectors must I already have to install the 8 mm flush panel light?

You need a panel cut-out for the 8 mm mounting diameter, thickness between 0.024 in and 0.055 in, and 0.11 male quick-disconnect terminals for the electrical connection.

Will the IP40-rated light fit in the same 8 mm cut-out used by older indicator lamps?

Yes, the 8 mm mounting diameter matches common legacy cut-outs, and the 0.024 in to 0.055 in panel-thickness range covers most existing panels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.