We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber LED panel light with stainless steel bezel, 18mm mount

Dayton

Dayton 22NY63 Raised Panel Light Amber 120 V AC 18mm

SKU CH-9Y14-DYYCD

A raised panel indicator light with amber LED illumination for 120 V AC circuits, mounting in an 18 mm hole with an IP65-rated nylon body and stainless steel bezel

  • Engine BrandDAYTON
  • Engine Size18mm Mounting dia
  • 120 V AC operation suits standard industrial power
  • Amber LED provides clear visual status at a glance
  • IP65 rating protects against dust and water jets
  • 25,000 hour average life reduces replacement frequency
  • 18 mm mounting diameter fits common panel cutouts

18 mm amber panel light

The Dayton 22NY63 is a raised-panel indicator designed for 120 V AC control circuits. Its 18 mm mounting diameter fits standard industrial cut-outs and the amber LED suits status or alarm functions.

IP65 sealed for continuous duty

The nylon body with polycarbonate lens and stainless-steel bezel meets IP65, so the light resists dust and water jets during sustained operation. Current draw stays at 5.9 mA and the rated average life reaches 25,000 hours.

Verify panel cut-out and voltage

Confirm the mounting hole matches the 18 mm diameter and that panel thickness falls between .047 in and .114 in. Ensure the supply is 120 V AC and the .187 in tab terminals suit your wiring.

Highlights

  • 120 V AC operation suits standard industrial power
  • Amber LED provides clear visual status at a glance
  • IP65 rating protects against dust and water jets
  • 25,000 hour average life reduces replacement frequency
  • 18 mm mounting diameter fits common panel cutouts

Specifications

Engine BrandDAYTON
Engine Size18mm Mounting dia

Questions about this item

How much heat or noise does the 120 V AC amber panel light produce when it runs continuously?

The LED draws only 5.9 mA at 120 V AC, so heat output is minimal and the solid-state design makes no audible noise.

What mounting hardware must I already have to install this 18 mm diameter indicator?

You need a panel cut to 18 mm with a thickness between 0.047 in and 0.114 in, plus 0.187 in tab terminals or matching quick-connect sockets.

Will this UL-listed IP65 amber light work reliably next to older 120 V incandescent indicators on the same panel?

Yes, it operates on the same 120 V AC supply, fits the same 18 mm cut-out range, and its low 5.9 mA draw will not overload legacy wiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.