We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round red raised panel indicator light with stainless steel bezel, 18mm mount, 120V AC

Dayton

Dayton 22NY60 Raised Panel Light Red 120V AC 18mm

SKU CH-ME7E-C14WH

A red 120V AC LED indicator with an 18mm raised panel mount, IP65 sealing and a 25,000-hour rated life

  • Engine BrandDAYTON
  • Engine Size18mm Mounting dia
  • Red LED visibility with 120 V AC operation
  • Compact 18 mm mounting diameter fits tight panels
  • IP65 rating protects against dust and water jets
  • 25,000-hour average life reduces replacement frequency
  • UL Listed for verified safety compliance

Raised Panel Light 18mm Mounting

This Dayton raised panel light is a round LED indicator designed for 120V AC industrial control panels. It fits an 18mm mounting diameter and uses a 0.187 inch tab connection. The nylon body, polycarbonate lens and stainless steel bezel carry an IP65 rating and UL listing. It draws 5.9 mA and offers a 25,000 hour average life.

Suits 120V AC Panels Only

This light suits panels between 0.047 and 0.114 inch thick that require a red 120V AC indicator. Buyers needing a different voltage, colour, mounting size or panel thickness range should look at other options. The tab terminals also mean it is not for solder or screw-wire installations.

120V AC Voltage Decides Fit

The single specification that decides fit is the 120V AC operating voltage. If your control circuit runs on any other voltage, this indicator will not work and a different unit must be chosen. All other dimensions and ratings are secondary to this requirement.

Highlights

  • Red LED visibility with 120 V AC operation
  • Compact 18 mm mounting diameter fits tight panels
  • IP65 rating protects against dust and water jets
  • 25,000-hour average life reduces replacement frequency
  • UL Listed for verified safety compliance

Specifications

Engine BrandDAYTON
Engine Size18mm Mounting dia

Questions about this item

Does the 5.9 mA draw of the 22NY60 add noticeable heat or power load when the panel light runs continuously?

The light draws only 5.9 mA at 120 V AC, so its power consumption is minimal and it generates very little heat during all-day operation.

What panel cut-out and thickness does the 18 mm raised panel light require for installation?

It needs an 18 mm diameter mounting hole and fits panel thicknesses from 0.047 in to 0.114 in.

Can the IP65-rated 22NY60 be wired alongside older 120 V AC indicator lights using the same 0.187 in tab connections?

Yes, the 0.187 in tab terminals are a standard size, so the light can share wiring with legacy 120 V AC indicators.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.