We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red raised panel indicator light with stainless steel bezel and polycarbonate lens, half-inch mount

Dayton

Dayton 22NY55 Raised Panel Light Red 240V AC/DC 1/2in Mounting

SKU CH-X2QJ-QJAAN

A 240 V AC/DC red LED panel indicator with a 1/2 in mounting diameter, 6 in wire leads and a 15,000-hour rated life

  • Engine BrandDAYTON
  • Engine Size1/2 in Mounting dia
  • Red LED indicator for 240 V AC/DC systems
  • 15,000-hour average life reduces replacement frequency
  • IP40 rating protects against solid objects
  • 1/2 in mounting diameter fits standard panels
  • UL Listed for verified safety compliance

Product Identity

The Dayton 22NY55 is a raised panel indicator light built for industrial control panels. It suits maintenance engineers and panel builders who need a reliable 240 V AC/DC status signal in a compact 1/2 in mounting diameter.

Sustained Operation

The LED draws 4.17 mA and carries an average rated life of 15,000 hours under continuous 240 V supply. Its IP40-rated nylon body with polycarbonate lens and stainless steel bezel resists dust ingress during long shifts in factory environments.

Installation Checklist

Verify your panel cut-out matches the 1/2 in mounting diameter and that panel thickness falls between 0.030 in and 0.093 in. Ensure the 6 in wire leads reach your termination points and confirm the circuit can accommodate the 4.17 mA draw at 240 V AC/DC.

Highlights

  • Red LED indicator for 240 V AC/DC systems
  • 15,000-hour average life reduces replacement frequency
  • IP40 rating protects against solid objects
  • 1/2 in mounting diameter fits standard panels
  • UL Listed for verified safety compliance

Specifications

Engine BrandDAYTON
Engine Size1/2 in Mounting dia

Questions about this item

How much heat or power does the 240V AC/DC LED panel light generate when running continuously?

The LED draws only 4.17 mA at 240 V, so heat output and power consumption are minimal even during all-day operation.

What existing panel cut-out and wiring are needed to install this 1/2 in mounting diameter indicator?

You need a 1/2 in diameter hole in a panel 0.030 in to 0.093 in thick, plus the ability to connect the supplied 6 in wire leads to a 240 V AC/DC circuit.

Will this UL Listed IP40 panel light fit alongside older indicators that use the same 1/2 in mounting size?

Yes — it uses the standard 1/2 in mounting diameter and 6 in wire leads, so it can replace or sit beside legacy units with the same cut-out and wiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.