Dayton
Dayton 22NY45 Raised Panel Light Green 24 V AC/DC 1/2 in Mounting
A raised panel indicator light with a green LED, 24 V AC/DC operation, 12 mA draw, 25,000-hour life and IP40 rating for 1/2 in mounting
- Engine BrandDAYTON
- Engine Size1/2 in Mounting dia
- Green LED indicator for clear status
- 24 V AC/DC supply fits common control circuits
- 12 mA draw keeps energy use low
- 25 000 hr average life reduces replacements
- IP40 rating protects against solid particles
Raised Panel Light 24 V AC/DC
The Dayton 22NY45 is a green LED indicator designed for industrial control panels. It mounts in a standard 1/2 in cutout and operates on both AC and DC supplies. The nylon body and polycarbonate lens resist impact while the stainless steel bezel adds durability. It suits operators who need clear status signalling in machinery or process equipment.
Capacity and headroom
The lamp draws only 12 mA at 24 V, placing minimal load on control circuits. Average life is rated at 25,000 hours of continuous use. IP40 protection shields against solid objects larger than 1 mm but offers no water resistance. Panel thickness must stay between .030 in and .093 in for secure clamping. It is not suited for wet or outdoor environments without additional sealing.
UL Listed compliance
This indicator carries a UL Listing, confirming it meets recognised safety requirements for industrial control accessories. The six-inch wire leads simplify termination inside the enclosure. California Proposition 65 warnings apply due to chemicals known to cause cancer and reproductive harm. Buyers needing a different voltage, colour or IP rating must select an alternative part.
Highlights
- Green LED indicator for clear status
- 24 V AC/DC supply fits common control circuits
- 12 mA draw keeps energy use low
- 25 000 hr average life reduces replacements
- IP40 rating protects against solid particles
Specifications
| Engine Brand | DAYTON |
|---|---|
| Engine Size | 1/2 in Mounting dia |
Questions about this item
Will the 1/2 in mounting diameter fit the cut-outs on my existing panel?
Yes, the raised panel light is designed for a 1/2 in mounting diameter and accepts panel thicknesses from 0.030 in to 0.093 in.
How can I verify the green LED is operating correctly once installed?
Apply 24 V AC/DC and confirm the green LED illuminates with a current draw of approximately 12 mA.
Does the package include any mounting hardware or connectors, or must I source them separately?
The unit ships with 6 in wire leads for electrical connection; mounting hardware for the 1/2 in hole is not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



