We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray metal mounting base with two clamps for NEMA 42 motor

Dayton

Dayton 22F195 Mounting Base NEMA 42 4-3/4 In

SKU CH-BWMX-RMBHN

Mounts NEMA 42 motors with a 4-3/4 inch ring-to-ring distance and includes two clamps

  • Designed for NEMA 42 frame motors
  • Resilient ring base reduces vibration transfer
  • Two clamps included for secure installation
  • Gray finish suits industrial environments
  • Bolt-hole spacing 1 3/4 in and 2 3/4 in

Dayton 22F195 Mounting Base NEMA 42

The Dayton 22F195 mounting base fits NEMA frame 42 motors with a 5 inch diameter and a 2 1/2 inch ring diameter. It is designed for HVAC blower installations that require a resilient ring mount. The base includes two clamps and comes in a gray finish.

Check motor diameter and bolt pattern before

Verify that the motor diameter matches 5 inches and the ring diameter is 2 1/2 inches. Confirm the bolt hole spacing length of 1 3/4 inches and 2 3/4 inches and the bolt hole spacing width of 4 1/4 inches. Ensure the ring-to-ring distance of 4 3/4 inches suits the application.

Replaces worn or missing resilient ring bases

This base replaces a damaged or missing resilient ring mounting base on compatible NEMA 42 frame blowers. The upgrade is worth it when the original mount has cracked, corroded or lost alignment. It restores secure motor positioning and reduces vibration in the blower assembly.

Highlights

  • Designed for NEMA 42 frame motors
  • Resilient ring base reduces vibration transfer
  • Two clamps included for secure installation
  • Gray finish suits industrial environments
  • Bolt-hole spacing 1 3/4 in and 2 3/4 in

Specifications

BrandDAYTON

Questions about this item

What comes in the box with the Dayton 22F195 mounting base and what else is needed to install it?

The package includes the resilient ring mounting base and two clamps; mounting bolts for the 1 3/4 in and 2 3/4 in length holes and the 4 1/4 in width holes must be supplied separately.

How do I know if the 4-3/4 in ring-to-ring distance matches my motor?

Choose this base when your motor uses a NEMA 42 frame, has a 5 in diameter and a 2 1/2 in ring diameter; the 4 3/4 in spacing then aligns with the motor’s mounting rings.

Will the 3 3/8 in overall height fit inside my blower housing?

The base stands 3 3/8 in tall, 4 13/16 in long and 6 in wide; verify those clearances against your housing interior before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.