We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow plastic pendant station with two push buttons and hanging grip

Dayton

Dayton 20C812 2NO Pendant Station Yellow

SKU CH-TV8H-DZHGA

Two-button pendant station with momentary push-buttons, 2NO contacts rated 10 A at 600 V AC, NEMA 1/3/3R/4/4X plastic enclosure in yellow

  • Engine BrandDAYTON
  • Two normally-open contacts for reliable circuit control
  • NEMA 1, 3, 3R, 4, 4X enclosure resists dust and water
  • Momentary push-button action with mechanical interlock prevents simultaneous operation
  • cULus listed for verified safety compliance
  • Yellow plastic housing with hand grip for visible, portable use

Pendant Control Station

The Dayton 20C812 is a hand-held pendant control station designed for industrial equipment operation. It provides two momentary push-button operators with an up/down legend for directional control. The unit is built for operators who need a durable, hand-grip mounted interface.

NEMA 1 3 3R 4 4X Enclosure

The plastic yellow enclosure carries NEMA ratings 1, 3, 3R, 4 and 4X for protection against dust, rain, sleet and hose-directed water. A mechanical interlock prevents simultaneous activation of both operators. The station mounts via a 1/2 inch NPT hub on a hand grip or hanger.

10A 600V AC Contact Rating

Each of the two normally open contacts is rated for 10 amperes at 600 volts AC and 5 amperes at 600 volts DC under the A600/P600 designation. This rating determines whether the station can safely switch the intended control circuit load. The product carries cULus certification.

Highlights

  • Two normally-open contacts for reliable circuit control
  • NEMA 1, 3, 3R, 4, 4X enclosure resists dust and water
  • Momentary push-button action with mechanical interlock prevents simultaneous operation
  • cULus listed for verified safety compliance
  • Yellow plastic housing with hand grip for visible, portable use

Specifications

Engine BrandDAYTON

Questions about this item

How do I mount the pendant station and wire the 1/2 in. -14 NPT hub?

Mount the station using the built-in hand grip or hanger. Feed cables through the 1/2 in. -14 NPT hub, strip conductors to the length specified by the terminal block, and secure each wire under the correct 2NO contact screw — the step often missed is tightening the gland nut after wiring to maintain the NEMA 4X seal.

Which parts will need replacement after extended use?

The momentary push-button operators and the internal 2NO contact blocks are the wear items; each is rated for 10 A at 600 V AC and 5 A at 600 V DC, so plan to replace them when the contacts show pitting or the button action becomes inconsistent.

What is the first limitation I will hit during continuous operation?

The contact rating of 10 A at 600 V AC (5 A at 600 V DC) is the limiting factor; sustained loads above this will cause the contacts to overheat and fail before the plastic enclosure or mechanical interlock reaches any limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.