Dayton
Dayton 1VNY2 Portable Electric Heater Gray
Portable electric heater with 900W and 1500W settings, mechanical controls, overheat protection and gray flat-panel housing
- ColorGray
- Dual heat settings deliver 900 W or 1500 W output
- Fan-forced design spreads warmth quickly across the room
- Mechanical push-button controls give straightforward operation
- Thermal overheat protection with manual reset adds safety
- Compact 10 in high gray panel fits tight spaces
Portable Electric Heater 1500W
The Dayton 1VNY2 is a portable electric heater designed for supplemental warmth in small indoor spaces. It operates on standard 120V AC household power and offers two heat output settings of 750W and 1500W. The gray flat-panel unit uses fan-forced air circulation to distribute heat quickly. It is not intended for whole-room primary heating or permanent installation.
Simple Placement and Operation
No installation is required beyond placing the unit on a stable, level surface and plugging it into a grounded 120V outlet. Mechanical push-button controls select the desired wattage setting. The heater lacks a tip-over safety switch, so it must be positioned where it cannot be accidentally knocked over. Overheat protection uses a manual reset thermal limiter that requires user intervention if activated.
Supplemental Heating Limits
The 1500W maximum output is suited for taking the chill off a personal area rather than heating large rooms. Fan-forced operation creates audible airflow noise during use. The non-oscillating design directs heat in a fixed direction only. This unit carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm. It is not programmable and includes no remote control functions.
Highlights
- Dual heat settings deliver 900 W or 1500 W output
- Fan-forced design spreads warmth quickly across the room
- Mechanical push-button controls give straightforward operation
- Thermal overheat protection with manual reset adds safety
- Compact 10 in high gray panel fits tight spaces
Specifications
| Brand | DAYTON |
|---|---|
| Color | Gray |
Questions about this item
How can I verify the 1500 W setting is heating correctly after plugging it in?
Select the 1500 W push-button setting, confirm the fan runs and warm air exits the flat-panel grille, and ensure the thermal overheat protection does not trip during normal operation.
What comes in the box and what must I buy separately?
The heater ships as a complete 120 V AC unit with mechanical push-button controls and manual-reset overheat protection; no remote, mounting hardware or additional accessories are included.
Should I choose the 900 W or 1500 W heat setting for my space?
Use the 900 W setting for smaller rooms or supplemental warmth and the 1500 W setting when maximum fan-forced output is needed; both are selectable on the same unit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



