D.A.P.
D.A.P. 7565000043 Multipurpose Spray Foam Sealant 12 oz Aerosol
Expands 2–3 times to fill cavities over one inch, cures fully in 24 hours and insulates to R-4
- TypeTraffic & Parking Lot
- Fills and seals cavities over one inch
- Polyurethane foam expands two to three times
- Ready to paint or trim after twenty minutes
- Full cure reached in twenty-four hours
- Usable for up to thirty days after opening
Product Identity
DAP 7565000043 Multipurpose Spray Foam Sealant is a one-component polyurethane foam in a 12 oz aerosol can. It expands to fill and seal cavities larger than one inch for indoor and outdoor construction tasks. The tan colour matches common building materials.
Build Integration
The aerosol format needs no mixing equipment or external dispenser, freeising up compressor hoses and two-part kits on site. It works in temperatures from 41 to 86 degrees F, so scheduling is straightforward for most job-site conditions. Full cure takes 24 hours before the foam can be trimmed or painted.
Thermal and Power Profile
The cured foam delivers an insulation value of R-4 and remains stable from -20 to 200 degrees F. Flash point is -156 degrees F, indicating low flammability risk once cured. Specific gravity ranges from 1.1 to 1.3, reflecting the dense cellular structure after the 2-3:1 expansion ratio.
Highlights
- Fills and seals cavities over one inch
- Polyurethane foam expands two to three times
- Ready to paint or trim after twenty minutes
- Full cure reached in twenty-four hours
- Usable for up to thirty days after opening
Specifications
| Brand | DAP INC |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
How large a cavity can this foam fill before it stops expanding properly?
The foam expands at a 2 to 3 to 1 ratio and is designed for cavities larger than one inch, so it will keep filling until the void is closed.
What temperature does the cured foam withstand during all-day exposure?
Once cured the sealant performs from minus twenty up to two hundred degrees Fahrenheit.
What surface temperature is required before I can spray this product?
The substrate must be between forty-one and eighty-six degrees Fahrenheit for the foam to begin hardening in twenty minutes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.0021445BTC
In stock