D.A.P.
D.A.P. 12132 Vinyl Spackling Paste 1 qt Tub White
Vinyl spackling paste in a 1 qt tub for drywall, plaster, wood and stucco repairs
- TypeNULL
- White vinyl spackling ready for immediate use
- 1 quart tub covers multiple repair jobs
- Adheres to drywall, plaster, wood and brick
- Dries in 5 hours for fast recoating
- Flash point above 200 °F for safer handling
Ready-to-Use Vinyl Spackling Paste
D.A.P. 12132 Vinyl Spackling Paste is a white, pre-mixed compound for patching holes and cracks in drywall, plaster, wood, brick and stucco. The 1 qt tub is intended for interior repairs and small projects. It is ready to apply straight from the container. Clean-up is simple with water while the material is wet.
For Interior Patchwork, Not Structural Work
This paste suits homeowners and tradespeople filling nail holes, hairline cracks or minor surface imperfections before painting. It adheres to the listed porous substrates and dries to a hard, sandable finish in about five hours. Builders needing structural fill, exterior-grade flexibility or a product rated for high-traffic floors should select a different compound.
Flash Point Above 200 Degrees Fahrenheit
The material has a flash point greater than 200 degrees Fahrenheit and a service temperature range of 0 to 150 degrees Fahrenheit. These figures indicate low flammability risk during storage and use in normal indoor conditions. California Proposition 65 warnings apply because the formulation contains a chemical known to the state to cause cancer and reproductive harm.
Highlights
- White vinyl spackling ready for immediate use
- 1 quart tub covers multiple repair jobs
- Adheres to drywall, plaster, wood and brick
- Dries in 5 hours for fast recoating
- Flash point above 200 °F for safer handling
Specifications
| Brand | DAP |
|---|---|
| Type | NULL |
Questions about this item
What surfaces can I apply the 12132 spackling paste to?
The paste adheres to brick, drywall, plaster, wood and stucco surfaces.
Can I use the 12132 paste in an unheated garage that drops below freezing?
The product is rated for a temperature range of 0 degrees to 150 degrees Fahrenheit.
How long should I wait before sanding or painting over the 12132 repair?
The manufacturer lists a dry time of 5 hours before the material is ready for the next step.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



