We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel vacuum relief valve with 1 inch NPT male inlet

Control Devices

Control Devices VRGSS100-001 Vacuum Relief Valve 1" NPT

SKU CH-EBXY-5BSZ3

Stainless-steel vacuum relief valve with 1" NPT male inlet protects low-pressure tanks and steam vessels up to 13.3 psi and 400 °F

  • Stainless steel body resists corrosion in harsh environments
  • Proportional relief design protects low-pressure tanks and steam vessels
  • Operates from -20 °F to 400 °F for wide temperature range
  • 1" NPT male inlet enables direct pipe connection
  • Flow capacity up to 50 cfm at 13.3 psi cracking pressure

Stainless-Steel Vacuum Relief Valve 1" NPT

The Control Devices VRGSS100-001 is a proportional vacuum relief valve built from stainless steel with a 1" NPT male inlet. It protects low-pressure tanks, steam vessels and vacuum equipment by opening automatically when vacuum exceeds the set point.

Installers needing 13.3 psi maximum operating

This valve suits systems that operate between -20 °F and 400 °F and require a cracking pressure up to 13.3 psi. It is not for applications that demand a higher flow capacity, a different inlet size or a cracking pressure outside the 0 in Hg to 13.3 psi range.

1" NPT male inlet port

The single specification that decides fit is the 1" NPT male inlet connection; verify that your vessel or piping matches this exact thread size and gender before ordering.

Highlights

  • Stainless steel body resists corrosion in harsh environments
  • Proportional relief design protects low-pressure tanks and steam vessels
  • Operates from -20 °F to 400 °F for wide temperature range
  • 1" NPT male inlet enables direct pipe connection
  • Flow capacity up to 50 cfm at 13.3 psi cracking pressure

Specifications

BrandCONTROL DEVICES

Questions about this item

How do I confirm the valve is relieving vacuum at the correct pressure after installation?

The valve begins to open at 0 in Hg and reaches full flow at 13.3 psi, so a pressure gauge on the tank should show relief starting within that range.

What comes with the VRGSS100-001 and what must I supply myself?

The valve body with 1" male NPT inlet is supplied; you must provide the mating 1" female NPT fitting, pipe sealant and any mounting hardware.

Which cracking-pressure version should I choose for a low-pressure tank rated to 13.3 psi?

This model covers 0 in Hg to 13.3 psi, matching the tank's maximum operating pressure, so no alternative version is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.