We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Condor 35KU99 self-retracting lifeline, 6 ft, carabiner hook, yellow housing

Condor

Condor 35KU99 Self-Retracting Lifeline 6 ft Carabiner

SKU CH-6QCA-21QVN

A self-retracting lifeline with 6 ft HPPE line, steel carabiner harness connection and aluminium snap-hook anchorage, rated to 310 lb capacity and meeting ANSI Class B 2014 and Class 1 2021 standards

  • ANSI Class B 2014 / Class 1 2021 compliance
  • 6 ft HPPE lifeline self-retracts for freedom of movement
  • Steel carabiner harness connection with aluminum snap-hook anchorage
  • Rated for users from 130 lb up to 310 lb
  • Overhead-only anchor design for vertical fall protection

6 ft self-retracting lifeline for overhead fall

The Condor 35KU99 is a single-leg self-retracting lifeline with a 6 ft HPPE line and steel carabiner harness connection. It is rated for users between 130 lb and 310 lb and certified to ANSI SRL Class B (2014) and Class 1 (2021). The aluminium snap hook anchors overhead only. It suits workers who need a compact fall-arrest device for fixed overhead anchor points.

Sealed-no housing with lightweight line

The unit is not sealed, so debris or moisture can enter the mechanism during normal use. HPPE line and aluminium snap hook keep the assembly light, reducing the load carried by the worker. No motor, fan or active cooling is present, so there is no operational noise or power draw to consider. Regular inspection of the retracting spring and line is the only ongoing requirement.

Steel carabiner and single-leg layout for simple

A steel carabiner at the harness end provides a secure, quick connection compatible with standard fall-protection harnesses. The single-leg design means only one anchorage point is managed per user, simplifying pre-use checks. Overhead-only anchoring restricts the device to work positions where a suitable overhead structure exists; it cannot be used for foot-level tie-off or horizontal lifeline systems. Buyers who need a sealed housing, dual-leg configuration or foot-level anchorage should select a different model.

Highlights

  • ANSI Class B 2014 / Class 1 2021 compliance
  • 6 ft HPPE lifeline self-retracts for freedom of movement
  • Steel carabiner harness connection with aluminum snap-hook anchorage
  • Rated for users from 130 lb up to 310 lb
  • Overhead-only anchor design for vertical fall protection

Specifications

BrandCONDOR

Questions about this item

How do I install the Condor 35KU99 SRL with its overhead-only anchor and steel carabiner, and what step is often missed?

Connect the aluminum snap hook to a rated overhead anchor, then attach the steel carabiner to the harness dorsal D-ring; the step often missed is verifying the anchor is rated for 310 lb and positioned directly overhead.

What maintenance or replacement will the HPPE lifeline and sealed mechanism need over time?

Inspect the HPPE lifeline before each use for cuts, abrasion, or heat damage; replace the unit immediately after any fall arrest or if the retraction spring fails to tension the line fully.

What limit appears first during sustained use of this Class B / Class 1 SRL with a 6 ft HPPE line?

The 6 ft working length is the first limit; it restricts horizontal movement before the 310 lb capacity or ANSI arrest-distance requirements become factors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.