We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1/8 inch end mill, four flutes, TiCN coating

Cleveland Golf

Cleveland Golf HG-4C End Mill 1/8 4FL TiCN

SKU CH-CW0Z-TQE4N

A four-flute high-speed steel end mill with TiCN coating for finishing operations

  • TypeHole, Drill, Bore & Wire Gauges
  • TiCN coating extends tool life
  • Four flutes produce smooth finishes
  • 30-degree helix clears chips efficiently
  • 1/8-inch diameter suits precision slots
  • 3/8-inch shank fits standard holders

Cleveland Golf HG-4C End Mill Overview

The Cleveland Golf HG-4C is a high-speed steel square end mill designed for general-purpose finishing operations. It suits machinists and fabricators who need a reliable fractional-inch cutter for producing smooth surfaces on a variety of workpiece materials.

Four-Flute TiCN-Coated Construction

A 30-degree helix angle and four-flute geometry promote stable chip evacuation and reduced vibration during finishing passes. The TiCN coating increases surface hardness and wear resistance, while the 3/8-inch shank fits standard tool holders for quick changes on manual or CNC machines.

Upgrade From Uncoated Two-Flute Cutters

Shops moving from uncoated two-flute tools gain longer edge life and finer finish quality on finishing cuts. The jump is worthwhile when cycle time and surface finish matter more than heavy material removal, and when the 1/8-inch diameter matches the feature size required.

Highlights

  • TiCN coating extends tool life
  • Four flutes produce smooth finishes
  • 30-degree helix clears chips efficiently
  • 1/8-inch diameter suits precision slots
  • 3/8-inch shank fits standard holders

Specifications

BrandCleveland
TypeHole, Drill, Bore & Wire Gauges

Questions about this item

Does the 30-degree helix angle limit chip evacuation in deep slots?

The 30-degree helix is a general-purpose geometry; it evacuates chips adequately for the 3/8-inch length of cut but is not optimised for deep-slotting.

Will the 3/8-inch shank fit a standard ER16 collet?

No, an ER16 collet maximum capacity is smaller than the 3/8-inch shank diameter.

Is the TiCN finish applied after the final grind or before?

The TiCN coating is applied after final grinding so the cutting edges retain the coated geometry.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.