We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical HSS end mill, TiCN coated, 2 flutes, square end, 30-degree helix

Cleveland Golf

Cleveland Golf End Mill HSS TiCN 7/16 2 FL SGL Sq End

SKU CH-876S-JKX03

A general-purpose HSS end mill with TiCN finish for finishing cuts in fractional-inch sizes

  • TypeHole, Drill, Bore & Wire Gauges
  • TiCN coating extends tool life
  • Two-flute design clears chips efficiently
  • 13/16 in. cut length handles deep slots
  • 30-degree helix reduces vibration
  • 3/8 in. shank fits standard holders

Purpose and User

This Cleveland Golf end mill is a single-ended, square-profile cutter made from high-speed steel with a TiCN coating. It is intended for machinists and maintenance workshops performing general-purpose finishing operations in a variety of ferrous and non-ferrous materials.

Upgrade Path

The tool replaces uncoated high-speed steel end mills where longer edge life and reduced built-up edge are required. The TiCN finish makes the jump worthwhile when cutting abrasive alloys or when higher cutting speeds are needed without moving to solid carbide tooling.

Practical Limits

The 30-degree helix and two-flute geometry limit chip evacuation in deep slots or heavy roughing passes. The 3/8-inch shank diameter restricts rigidity on longer reaches, and the 13/16-inch length of cut defines the maximum single-pass depth for finishing work.

Highlights

  • TiCN coating extends tool life
  • Two-flute design clears chips efficiently
  • 13/16 in. cut length handles deep slots
  • 30-degree helix reduces vibration
  • 3/8 in. shank fits standard holders

Specifications

BrandCleveland
TypeHole, Drill, Bore & Wire Gauges

Questions about this item

What shank diameter does this 7/16 inch end mill require in the tool holder?

The end mill has a 3/8 inch shank diameter, so the holder or collet must accept that exact size.

How do I correctly install this TiCN coated end mill in a milling machine?

Insert the 3/8 inch shank fully into a matching collet or holder, tighten securely, and verify the 30 degree helix rotates clockwise for right-hand cutting.

When should I replace this HSS square end mill after finishing work?

Replace it when the TiCN coating wears through, the 0.000 inch corner radius shows chipping, or the 13/16 inch cutting length no longer produces a clean finish.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.