We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical end mill with two spiral flutes and a square tip

Cleveland Golf

Cleveland Golf End Mill HSS TiCN 1/4 2FL SGL Sq End CC

SKU CH-6FNC-DSZ5M

Square end mill in high-speed steel with TiCN finish, two flutes and 30-degree helix for finishing operations

  • TypeHole, Drill, Bore & Wire Gauges
  • TiCN coating extends tool life for finishing cuts
  • Two-flute design clears chips efficiently in general-purpose milling
  • 30-degree helix angle promotes smooth cutting action
  • 1/4-inch diameter with 1/2-inch length of cut suits precise profiling
  • 3/8-inch shank fits standard tool holders for secure clamping

Cleveland Golf End Mill HSS TiCN

This single-end square end mill is made from high-speed steel with a TiCN finish for general-purpose finishing. It suits machinists and fabricators who need a reliable cutter for light finishing passes in a range of materials.

Two-flute design with centre cutting

The two-flute geometry and centre-cutting capability allow the tool to plunge directly into the workpiece and clear chips efficiently. A 30-degree helix angle supports smooth cutting action during finishing operations.

Straightforward installation in standard holders

The 3/8-inch shank fits common collets and end-mill holders without adapters. Users must ensure the 1/2-inch length of cut matches the required depth to avoid deflection or tool interference.

Highlights

  • TiCN coating extends tool life for finishing cuts
  • Two-flute design clears chips efficiently in general-purpose milling
  • 30-degree helix angle promotes smooth cutting action
  • 1/4-inch diameter with 1/2-inch length of cut suits precise profiling
  • 3/8-inch shank fits standard tool holders for secure clamping

Specifications

BrandCleveland
TypeHole, Drill, Bore & Wire Gauges

Questions about this item

How often will the TiCN finish on this 1/4-inch end mill need replacement under normal finishing work?

The TiCN coating extends tool life during finishing passes, but replacement timing depends on material hardness, feed rates and coolant use rather than a fixed interval.

What limits continuous cutting with this 2-flute HSS end mill before performance drops?

Heat buildup in the high-speed steel substrate becomes the limiting factor during sustained cuts, especially at higher speeds without adequate coolant flow.

How much noise and heat does this 30-degree helix end mill generate during all-day finishing runs?

The 30-degree helix and TiCN finish promote smoother chip evacuation, reducing vibration and heat compared with uncoated tools, though exact levels vary with spindle speed and workpiece material.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.