Cleveland Golf
Cleveland Golf Cobalt Double End Mill 3/4 in. 4 Flute CC
A double-ended cobalt square end mill with four flutes, 30-degree helix and centre-cutting geometry for finishing operations
- TypeHole, Drill, Bore & Wire Gauges
- Cobalt construction resists wear for longer tool life
- Four-flute design produces smoother finishes on workpieces
- Double-ended style provides two cutting ends per tool
- 30-degree helix angle improves chip evacuation during cuts
- Bright uncoated finish suits general-purpose milling applications
Cleveland Cobalt Double-End Mill
The Cleveland Cobalt double-end mill is a general-purpose rotary cutter for milling machines. Its bright uncoated cobalt body suits metalworking shops and maintenance departments that need a replaceable tool for finishing passes in steel and similar alloys.
Finishing capacity with 1-5/8 in. cut length
The 1-5/8 inch length of cut provides reach for pocketing and profiling work on medium-depth features. Shorter flute length limits deep-cavity milling, so the tool runs out of engagement before the shank contacts the workpiece in taller parts.
30-degree helix for finishing cuts
A 30-degree helix angle and zero corner radius produce a smooth surface finish on right-hand rotation passes. The fixed geometry prevents use on roughing operations or materials that demand a variable-helix or chip-breaker design.
Highlights
- Cobalt construction resists wear for longer tool life
- Four-flute design produces smoother finishes on workpieces
- Double-ended style provides two cutting ends per tool
- 30-degree helix angle improves chip evacuation during cuts
- Bright uncoated finish suits general-purpose milling applications
Specifications
| Brand | Cleveland |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
Will the 3/4 in. shank fit the collet I already use on my mill?
The shank diameter is 3/4 in., so it matches standard 3/4 in. collets and holders.
How can I confirm the 30 degree helix is cutting cleanly after install?
Listen for a steady sound and check for consistent, uncoated chips with no chatter marks on the workpiece.
Does the double-end design ship with a protective sleeve or just the bare tool?
The tool arrives as a single bright-finish double-end mill; no sleeve, holder or coating is included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213248BTC
In stock