Cleveland Golf
Cleveland Golf C65896 pneumatic accessory M18x2.5 HSS die
M18 x 2.5 metric adjustable threading die in high-speed steel, 38.10 mm outside diameter and 12.70 mm thick
- TypeDies & Taps
- MaterialHigh speed steel
- M18x2.5 metric thread cuts precise external threads
- High-speed steel construction resists wear during repeated use
- 10 mm outside diameter fits standard die stocks
- 70 mm thickness provides rigid cutting stability
- Adjustable design allows fine thread-fit calibration
Threading die for M18 × 2.5 metric threads
This round adjustable die cuts right-hand M18 threads with a 2.5 mm pitch. It is made from high-speed steel and suits maintenance or repair work where a damaged or new external thread is required. The 38.10 mm outside diameter fits standard die stocks used in workshop and field service kits.
Critical spec: M18 × 2.5 thread size and pitch
The die only produces threads matching an 18 mm major diameter and a 2.50 mm pitch. Verify the workpiece specification before purchase; a different diameter or pitch will not engage correctly. The right-hand thread direction also means it cannot cut left-hand threads.
Uncoated high-speed steel with 12.70 mm thickness
The bright finish provides no coating lubrication, so cutting fluid is recommended to manage heat and extend edge life. At 12.70 mm thick the die has sufficient mass for hand or powered threading without excessive deflection. Adjustability allows slight diameter tuning for fit control.
Highlights
- M18x2.5 metric thread cuts precise external threads
- High-speed steel construction resists wear during repeated use
- 10 mm outside diameter fits standard die stocks
- 70 mm thickness provides rigid cutting stability
- Adjustable design allows fine thread-fit calibration
Specifications
| Brand | Cleveland |
|---|---|
| Model | C65896 |
| Type | Dies & Taps |
| Material | High speed steel |
Questions about this item
What does the M18x2.5 thread size mean when I use this die in my threading tool?
The die cuts external metric threads with an 18 mm major diameter and a 2.5 mm pitch, producing a standard M18 coarse thread on round bar stock.
How does the adjustable round-die design affect the thread fit I can achieve?
The adjustable split construction lets you tighten or loosen the die in its holder, so you can dial the thread pitch diameter tighter or looser to match the class of fit required.
What holder or stock do I need to mount this 38.10 mm outside-diameter die?
The die has a 38.10 mm outer diameter and 12.70 mm thickness, so it fits any standard round die stock or adjustable die holder made for that size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00212945BTC
In stock