We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical high-speed steel end mill with gold TiCN coating, four flutes, square end, three-quarter inch shank

Cleveland Golf

Cleveland Golf 3/4 4FL TiCN Square End Mill

SKU CH-CTX7-DNDHM

High-speed steel square end mill with TiCN coating, four flutes and 30-degree helix for finishing cuts

  • TypeHole, Drill, Bore & Wire Gauges
  • TiCN coating extends tool life during finishing cuts
  • Four-flute design improves surface finish on steel and alloys
  • 30° helix angle balances chip evacuation with edge strength
  • 3/4" shank and cut diameter match for rigid set-ups
  • Single-end, 1-5/8" length of cut suits general-purpose milling

Cleveland Golf 3/4 End Mill

The Cleveland Golf 3/4 4FL TiCN Square End Mill is a high-speed steel cutter finished with titanium carbonitride for general-purpose finishing. Its 30-degree helix and right-hand cut suit conventional milling machines working in steel, cast iron and non-ferrous alloys.

Shops finishing flat surfaces in fractional-inch

Machinists needing a single-end 3/4-inch tool with a 1-5/8-inch length of cut will find the dimensions match common holder capacities. Operations requiring a corner radius, ball-nose profile, double-end design or metric shank must select a different tool.

Corner radius .000 inches

The .000-inch corner radius creates a sharp intersection between the floor and wall of the cut. This square corner is required for finishing passes that must meet a print call-out without a fillet, but it prevents the tool from being used where a radius is specified.

Highlights

  • TiCN coating extends tool life during finishing cuts
  • Four-flute design improves surface finish on steel and alloys
  • 30° helix angle balances chip evacuation with edge strength
  • 3/4" shank and cut diameter match for rigid set-ups
  • Single-end, 1-5/8" length of cut suits general-purpose milling

Specifications

BrandCleveland
TypeHole, Drill, Bore & Wire Gauges

Questions about this item

How much heat or noise does the 30-degree helix generate during continuous finishing passes?

The 30-degree helix on this 4-flute HSS end mill reduces chatter in finishing cuts, lowering vibration and heat buildup during extended runs.

What tool holder or collet do I need for the 3/4-inch shank on this end mill?

A 3/4-inch shank requires a matching 3/4-inch collet, end-mill holder or shrink-fit chuck with the same internal diameter.

Will this TiCN-coated cutter work in the older manual knee mill I still use for finishing jobs?

Yes, the right-hand-cut, 30-degree-helix geometry is compatible with conventional manual mills for finishing operations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.