We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red CKD 4F510-10-AC220V magnetic valve single unit

CKD

CKD 4F510-10-AC220V Magnetic Valve W Series

SKU CH-H21R-QDQM0

A 220 V magnetic valve for outdoor fluid control, supplied as a single unit in a box

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Reliable outdoor operation with W Series weather-resistant design
  • Precise fluid control via 220V AC magnetic actuation
  • Simple installation as a single-valve unit
  • Immediate deployment with brand-new condition
  • Organised supply in a single 10-piece pack

CKD 4F510-10-AC220V Magnetic Valve

The CKD 4F510-10-AC220V is a magnetic valve from the W Series designed for outdoor use. It operates on a 220V AC supply and is supplied as a single valve in a box. This component suits engineers and technicians specifying fluid-control hardware for external installations.

Thermals Noise and Power Draw

The valve draws power only during actuation at its rated 220V AC input. No active cooling system is fitted, so the unit runs silently in normal operation. Heat generation remains minimal and is dissipated through the valve body into the surrounding ambient air.

Single Valve Configuration

This listing provides exactly one valve per pack, so projects requiring multiple stations must order additional units. The W Series designation identifies the specific product family for compatibility checks. Buyers needing a manifold assembly or a different voltage rating should verify those requirements before purchasing.

Highlights

  • Reliable outdoor operation with W Series weather-resistant design
  • Precise fluid control via 220V AC magnetic actuation
  • Simple installation as a single-valve unit
  • Immediate deployment with brand-new condition
  • Organised supply in a single 10-piece pack

Specifications

BrandCKD
ModelCKD 4F510-10-AC220V
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I mount the 4F510-10-AC220V valve for outdoor use and what wiring step is often missed?

Secure the valve body to a flat surface using the integral mounting holes, then connect the 220 V AC supply to the coil terminals observing the polarity marked on the housing; the most common error is forgetting to fit the supplied cable gland before tightening the gland nut, which lets moisture into the coil chamber.

Which wearable part of the 4F510-10-AC220V will need replacement first and after roughly how long?

The internal plunger seal is the primary wear item; under typical cycling it lasts about three years, matching the parts coverage period, so plan to swap the seal kit at that interval.

What operational limit of the 4F510-10-AC220V appears first during continuous energising?

Coil temperature rise is the first limit reached; the winding insulation is rated for continuous 220 V AC duty, but sustained operation without airflow can push the coil to its thermal ceiling, causing the valve to stall until it cools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.