We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue pistol-grip pneumatic screwdriver with 1/4-inch hex bit holder and 1/4-inch NPT air inlet

Chicago Pneumatic

Chicago Pneumatic CP2755 10 cfm pistol-grip hand screwdriver

SKU CH-5Y4S-38P73 MPN CP2755

Pistol-grip air screwdriver delivers 45 to 65 in-lb soft-draw torque at 2,200 RPM free speed with a 1/4 in hex drive

  • TypeHex Drive Bits
  • Pistol-grip comfort for extended use
  • Direct-drive clutch delivers 5.4 ft-lb max torque
  • 2,200 RPM free speed drives fasteners quickly
  • 5 CFM average consumption suits small compressors
  • 1/4-in hex accepts standard bits

Air consumption and torque range

The Chicago Pneumatic CP2755 is a pistol-grip air screwdriver built for general-duty fastening. It delivers a soft-draw torque range of 45 to 65 in-lb and a maximum torque of 5.4 ft-lb at 90 psi. Average air consumption is 2.50 cfm over a 15 second run time and 29.7 cfm at full load. The tool requires a minimum 3/8 in hose and a 1/4 in NPT air inlet.

High-speed assembly versus precision torque control

Operators running repetitive assembly lines will benefit from the 2,200 rpm free speed and direct-drive clutch for quick rundown. Technicians who need adjustable clutch shut-off for critical torque accuracy should look at a different tool, as this model has no torque-limiting clutch.

1/4 in hex bit drive

The screwdriver accepts standard 1/4 in hex bits, making it compatible with common bit sets for Phillips, Torx and hex fasteners. Buyers whose applications require a different drive size or square-drive sockets will need another model.

Highlights

  • Pistol-grip comfort for extended use
  • Direct-drive clutch delivers 5.4 ft-lb max torque
  • 2,200 RPM free speed drives fasteners quickly
  • 5 CFM average consumption suits small compressors
  • 1/4-in hex accepts standard bits

Specifications

BrandChicago Pneumatic
ModelCP2755
TypeHex Drive Bits

Questions about this item

Which torque range suits light assembly versus heavier fastening with the CP2755?

The soft-draw torque range runs from 45 to 65 in-lb, while maximum torque reaches 5.4 ft-lb, so choose the lower end for delicate work and the upper end for tighter joints.

What does the 2,200 RPM free speed mean when the tool is under load?

Free speed is measured without resistance; under full load the air consumption rises to 29.7 CFM and actual speed will drop below 2,200 RPM depending on the joint stiffness.

How does the 1/4 in NPT air inlet and 90 psi requirement limit compressor choice?

The tool needs a 1/4 in NPT connection and 90 psi operating pressure, so the compressor must deliver at least 2.5 CFM average at that pressure with a minimum 3/8 in hose.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.