We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium pistol-grip air drill with keyed chuck and trigger throttle

Chicago Pneumatic

Chicago Pneumatic CP1014P45 air drill 1/4 in NPT keyed

SKU CH-6S9B-FT6C0

Air-powered pistol-grip drill with 1/4 in keyed chuck, 4,500 rpm free speed and 0.60–2.40 ft-lb torque range

  • 5 hp motor powers through industrial tasks
  • 4,500 rpm free speed for rapid drilling
  • Keyed 1/4 in chuck secures bits firmly
  • 3 CFM average consumption matches shop compressors
  • Aluminium handle with trigger throttle gives control

Air-Powered Drill With Keyed Chuck

The Chicago Pneumatic CP1014P45 is an air-powered pistol drill built for industrial duty. It accepts a 1/4 in keyed chuck and operates at a free speed of 4,500 RPM. Variable-speed trigger control lets the operator adjust drilling pace on the job.

Air Consumption And Pressure Limits

The drill requires 90 psi supply pressure and a minimum 3/8 in hose. Average consumption is 5.30 CFM over a 15 second run, rising to 21.0 CFM at full load. A compressor that cannot sustain these figures will cause the tool to stall under load.

Torque Range Decides Suitability

Output torque spans 0.60 to 2.40 ft-lb, so the drill suits light fastening and small-hole drilling in metal or wood. It will not cover applications that demand higher torque or a larger chuck capacity. Buyers needing more power should select a different model.

Highlights

  • 5 hp motor powers through industrial tasks
  • 4,500 rpm free speed for rapid drilling
  • Keyed 1/4 in chuck secures bits firmly
  • 3 CFM average consumption matches shop compressors
  • Aluminium handle with trigger throttle gives control

Specifications

BrandCHICAGO PNEUMATIC

Questions about this item

Should I pick the CP1014P45 or a different chuck size for my shop?

This model has a 1/4 in keyed chuck. Choose it when your bits are 1/4 in shank and you prefer a key for positive grip. Other chuck sizes are separate models.

What does the 500 RPM free speed mean when I am actually drilling?

Free speed is the no-load maximum. Under load the drill runs slower; torque ranges from .60 to 2.40 ft-lb so the motor delivers usable power through the cut.

How does the 1/4 in NPT air inlet limit the CFM I can use?

The 1/4 in NPT inlet is sized for the drill's 5.30 average CFM and 21.0 CFM full-load demand. Use a 3/8 in hose at 90 psi to meet that flow without excessive restriction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.