We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pistol-grip air drill with keyed chuck and trigger throttle

Chicago Pneumatic

Chicago Pneumatic CP1014P05 1/4 in NPT Keyed Pneumatic Drill

SKU CH-B8AY-JVXQX

A 3/8 in keyed-chuck pneumatic drill delivering 500 RPM and 4.55 to 18.20 ft-lb torque at 90 psi

  • 1/4 in NPT inlet fits standard shop air lines
  • 500 RPM free speed suits precision drilling tasks
  • 50 HP motor delivers 4.55 to 18.20 ft-lb torque range
  • Keyed 3/8 in chuck secures bits for heavy-duty use
  • Aluminum pistol-grip handle reduces operator fatigue

1/4 in NPT Air Drill for Industrial Work

This Chicago Pneumatic CP1014P05 pistol-grip drill runs on compressed air at 90 psi. It targets maintenance crews and assembly technicians who need a durable, keyed-chuck tool for repetitive drilling tasks. The aluminum handle and ball-bearing construction suit daily shop use. It is not for buyers who want a cordless electric alternative or a reversible drill.

0.50 HP Motor with 500 RPM Free Speed

The 0.50 hp motor delivers 4.55 to 18.20 ft-lb of torque at a no-load speed of 500 rpm. Variable-speed trigger control lets the operator feather the start. Average air consumption is 4.70 CFM during a 15 second run, rising to 19.0 CFM at full load. It runs out of steam on heavy steel or large-diameter holes that demand higher torque or speed.

3/8 in Keyed Chuck and 3/8 in Minimum Hose

A 3/8 in keyed chuck secures standard drill bits for general-purpose work. The 1/4 in NPT air inlet requires a 3/8 in minimum hose to supply adequate flow at 90 psi. Trigger throttle and forward-only rotation keep the control layout simple. It frees up bench space compared to bulky drill presses but needs a compressor and hose infrastructure that can sustain 19.0 CFM peaks.

Highlights

  • 1/4 in NPT inlet fits standard shop air lines
  • 500 RPM free speed suits precision drilling tasks
  • 50 HP motor delivers 4.55 to 18.20 ft-lb torque range
  • Keyed 3/8 in chuck secures bits for heavy-duty use
  • Aluminum pistol-grip handle reduces operator fatigue

Specifications

BrandCHICAGO PNEUMATIC

Questions about this item

Will the 1/4 in NPT air inlet connect directly to my existing 3/8 in hose?

The drill requires a 3/8 in minimum hose size. Use a 1/4 in NPT fitting on the tool side and match the hose end with the correct coupler for your 3/8 in hose.

How can I verify the drill is delivering the rated 500 RPM free speed after installation?

Run the tool at 90 psi with no load. A tachometer on the chuck should read approximately 500 RPM. Under load, speed drops as torque rises toward 18.20 ft-lb.

Does the box include the 3/8 in keyed chuck and any air fittings, or must I buy them separately?

The 3/8 in keyed chuck is fitted. The 1/4 in NPT air inlet is built in. You must supply a 3/8 in air hose, a compatible coupler, and airline lubricant.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.