We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chicago Pneumatic benchtop sand rammer, straight handle, silver finish

Chicago Pneumatic

Chicago Pneumatic CP0200B18-2F Benchtop Sand Rammer 1/4 in NPT

SKU CH-550N-K6HET

Benchtop sand rammer delivers 1,800 blows per minute at 95 dBA with 14.1 cfm air consumption and weighs 3.3 lb

  • Delivers 1,800 blows per minute for fast compaction
  • Consumes 14.1 cfm of air for efficient operation
  • Weighs only 3.3 lb to reduce operator fatigue
  • Operates at 95 dBA sound level for quieter use
  • Includes safety lever for enhanced operator protection

Benchtop Sand Rammer for Foundry Use

The Chicago Pneumatic CP0200B18-2F is a benchtop sand rammer designed for foundry applications. It delivers a maximum of 1,800 blows per minute with a piston bore and stroke of 2 1/2 inches each. The tool weighs 3.3 lb and operates at a sound level of 95 dBA. A safety lever is included in the kit.

Suits Foundry Work; Not for Heavy Mobile Compaction

This rammer suits foundry professionals needing consistent bench-top compaction of sand moulds. The straight handle and latch retainer provide controlled operation for repetitive tasks. Buyers requiring high-portability impact tools for deep or large-scale compaction should look at alternative equipment types.

Verify Air Supply and Hose Before Ordering

Confirm your compressor can deliver 14.1 cfm at the required pressure for sustained use. The tool requires a minimum 3/8-inch hose and connects via a 1/4-inch female NPT inlet. Ensure your air line matches the NPT thread type and that the workbench can accommodate the 1 5/8-inch hole and butt diameter.

Highlights

  • Delivers 1,800 blows per minute for fast compaction
  • Consumes 14.1 cfm of air for efficient operation
  • Weighs only 3.3 lb to reduce operator fatigue
  • Operates at 95 dBA sound level for quieter use
  • Includes safety lever for enhanced operator protection

Specifications

BrandCHICAGO PNEUMATIC

Questions about this item

What size air hose and inlet fitting does the CP0200B18-2F need to run?

Connect a hose with at least a 3/8 in inside diameter to the 1/4 in NPT female air inlet on the rammer.

Will my existing 14 cfm compressor keep up with this rammer at full speed?

The tool draws 14.1 cfm, so a compressor rated at or above that flow will sustain 1,800 bpm operation.

How can I verify the rammer is delivering its rated performance after hooking it up?

Listen for a steady 95 dBA sound level and confirm the piston cycles at 1,800 blows per minute under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.