Chamberlain 953EV-P2 Garage Door Opener Remote 2-Pack
Two universal remotes with rolling-code encryption operate Chamberlain, LiftMaster and Craftsman openers from 1993 at up to 164 feet
- Weight0.082 kilograms
- Horse PowerOver 3/4
- Compliancehas_fcc_id, not_applicable, 2AQXW-893MAX
- PowerCR2032
- Compatible with Chamberlain, LiftMaster and Sears Craftsman openers since 1993
- Rolling code encryption creates a new code every press to stop signal theft
- Industrial-grade chip tested to -40 °C for reliable operation in extreme cold
- 164 ft range penetrates two garage doors or walls for convenient distance use
- Pre-installed 240 mAh CR2032 lithium battery delivers up to five years of service
Universal 2-Pack Garage Door Remote
This two-pack of Chamberlain 953EV-P2 remotes controls garage door openers from Chamberlain, LiftMaster and Sears Craftsman that carry a Purple, Red, Orange, Yellow or Green learn button manufactured since 1993. Each unit ships with a pre-installed CR2032 lithium battery and is ready to program out of the box. The compact fob weighs 0.082 kilograms and fits easily on a key ring or in a vehicle console.
Replaces Over Thirty Legacy Models
The remote replaces legacy models including 953ESTD, 950ESTD, 953EV, 956EV, 950CD, 953CD, 950CB, 953CB, 891LM, 893LM, 371LM, 372LM, 373LM, 971LM, 972LM, 973LM, 81LM, 83LM, 139.53753, 41A6127-1, HBW2028, 139.53681 and 139.53680. It will not work with Security+ 3.0 white learn button openers or legacy DIP-switch units, so owners of those systems must seek a different replacement.
Fits Standard Builds With 164-Foot Range
The remote delivers up to 164 feet of range and penetrates two garage doors or walls, so it operates reliably from the driveway or street. Rolling-code encryption generates a new dynamic code on every press, preventing signal interception. The industrial-grade chip is tested to minus 40 degrees Celsius, and the 240 mAh lithium cell supports up to five years of use. Not compatible with Security+ 3.0 or DIP-switch openers.
Highlights
- Compatible with Chamberlain, LiftMaster and Sears Craftsman openers since 1993
- Rolling code encryption creates a new code every press to stop signal theft
- Industrial-grade chip tested to -40 °C for reliable operation in extreme cold
- 164 ft range penetrates two garage doors or walls for convenient distance use
- Pre-installed 240 mAh CR2032 lithium battery delivers up to five years of service
Specifications
| Model | 953EV-P2 953ESTD |
|---|---|
| Part Number | 953EV-P2 |
| Weight | 0.082 kilograms |
| Horse Power | Over 3/4 |
| Compliance | has_fcc_id, not_applicable, 2AQXW-893MAX |
| Power | CR2032 |
Questions about this item
What type of battery does the 953EV-P2 remote use?
Each remote uses a CR2032 lithium coin cell. The 240 mAh cell is pre-installed and rated for up to five years of normal use.
How do I program the remote to my Chamberlain opener with a purple learn button?
Press and release the learn button on the motor unit, then within 30 seconds press the remote button you want to use. The opener light will flash or click to confirm pairing.
When should I replace the battery in the 953EV-P2 remote?
Replace the CR2032 cell when range drops noticeably or the LED dims. Typical life is around five years; the remote takes a single coin cell that slides out from the back cover.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



