Cameron Sino PCC600 battery 5000mAh 3.7V
Replacement lithium-ion battery for Porter-Cable 20V tools, 5000 mAh capacity with ISO9001, RoHS and CE certification
- Long run time from 5000 mAh lithium-ion cell
- Exact fit for Porter Cable PCC600 and listed kit models
- Certified to ISO 9001 RoHS and CE standards
- Built-in protection against overcharge over-discharge and short circuit
- Ready to install with fully decoded chip matching original
Replacement Battery for Porter Cable Tools
This Cameron Sino PCC600 battery replaces the original power source for a wide range of Porter Cable 20V Max cordless tools. It uses lithium-ion chemistry rated at 5000mAh and 3.7V to deliver 100.00Wh of capacity. The unit is built to the same physical specifications as the OEM pack, measuring 119.10 x 78.90 x 72.40mm and weighing 610.0g. It suits owners of compatible drills, drivers and saws who need a fresh power pack.
Integrated Protection Chip and Packaging
A fully decoded chip inside the pack communicates with the tool and charger exactly like the original battery, enabling normal fuel-gauge read-outs and charge management. The internal circuitry provides over-charge, over-discharge, over-voltage and short-circuit protection to guard both the cells and the tool electronics. Each battery ships inside shock-absorbing foam that cushions the housing during transit, reducing the risk of cracked casings or loose connections before first use.
Simple Drop-In Installation With Break-In Cycle
The pack slides into the tool battery bay and locks with the original latches; no tools or soldering are required, and many users report the swap takes under a minute. Online installation videos demonstrate the procedure for the listed Porter Cable models. A new battery reaches its full rated capacity after two or three complete charge and discharge cycles, so initial run-time may be lower. Buyers who need a higher amp-hour rating or a different voltage platform will not be served by this 5000mAh 3.7V unit.
Highlights
- Long run time from 5000 mAh lithium-ion cell
- Exact fit for Porter Cable PCC600 and listed kit models
- Certified to ISO 9001 RoHS and CE standards
- Built-in protection against overcharge over-discharge and short circuit
- Ready to install with fully decoded chip matching original
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | PCC600, PCC601, PCC601LA, PCC620B, PCC620LB, PCC620LBR, PCC640, PCC640B, PCC641, PCC650B, PCC650BR, PCC660B, PCC661B, PCC670B, PCC670BR, PCC671B, PCC680L, PCC681L, PCC685L, PCC685LP, PCC700, PCC700B, PCC710B, PCC771B, PCC772B, PCC790LA, PCC791B, PCCK600LB, PCCK600LBR, PCCK602L2, PCCK602L2R, PCCK604L2, PCCK604LA, PCCK605L2R, PCCK612L2, PCCK612L2R, PCCK614L4, PCCK616L4, PCCK617L6, PCCK617L6R, PCCK619L8, PCCK640LB |
| Part Number | PCC680L, PCC681L, PCC682L, PCC685L, PCC685LP |
Questions about this item
How many charge cycles before the 5000mAh lithium-ion cells need replacement?
The manufacturer states a new battery reaches best performance after two or three full charge and discharge cycles; no specific cycle-life figure is published.
What thermal limit stops the pack from running continuously in a hot worksite?
The caution notice advises against storing the battery above 60 °C (140 °F); sustained operation near that temperature will trigger the built-in protection circuit.
How loud is the cooling fan when the 100Wh pack runs all day?
This battery has no cooling fan; it relies on passive dissipation through the 119.10 × 78.90 × 72.40 mm housing, so operation is silent.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00210394BTC
In stock