We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical battery pack with label showing Cameron Sino branding and part numbers

Cameron Sino Battery for Schlumberger Neptune Advantage 12.01 Probe 2000mAh

SKU CH-KPVS-69Z2V

Replacement 2000 mAh battery for Schlumberger Neptune Advantage 12.01 Probe and compatible models

  • 2000 mAh capacity powers the probe longer
  • 6 V output matches original specification
  • Certified to ISO 9001, RoHS and CE standards
  • Built-in protection guards against overcharge and short circuit
  • Compatible with part numbers 11992-001 and 12031-001

Cameron Sino 2000mAh Replacement Battery

This Cameron Sino battery replaces the original power cell in Schlumberger Neptune Advantage 12.01 Probe, Neptune Advantage Utility Mete and PS Advantage 12.01 Probe emergency lighting units. It delivers 2000mAh at 3.6V (7.20Wh) and carries ISO9001, RoHS and CE certification. A fully decoded chip ensures communication with the host device matches the factory battery.

Suitable for technicians servicing the listed

Buyers who need a different voltage, a higher capacity or a battery for non-Schlumberger equipment should look elsewhere. The part numbers 11992-001, 12031-001, BCN800-3GWP-CE623RP, OSA230, P100AA-3SC, P100AA-3SC-11992-001 and T26000188 must match the original cell exactly.

Straightforward swap with basic precautions

Installation videos are widely available and the connector plugs directly into the probe. Ensure the connector seats fully before closing the housing. Avoid low-quality chargers and do not expose the cell to temperatures above 60°C (140°F). Two or three full charge-discharge cycles bring the pack to peak runtime.

Highlights

  • 2000 mAh capacity powers the probe longer
  • 6 V output matches original specification
  • Certified to ISO 9001, RoHS and CE standards
  • Built-in protection guards against overcharge and short circuit
  • Compatible with part numbers 11992-001 and 12031-001

Specifications

BrandCameron Sino
ModelNeptune Advantage 12.01 Probe , Neptune Advantage Utility Mete, PS Advantage 12.01 Probe
Part Number11992-001, 12031-001, BCN800-3GWP-CE623RP, OSA230, P100AA-3SC, P100AA-3SC-11992-001, T26000188

Questions about this item

Will this battery fit my Schlumberger Neptune Advantage 12.01 Probe that currently uses part number 11992-001?

Yes, this Cameron Sino battery lists part numbers 11992-001 and 12031-001 among its direct replacements, so it matches the original battery used in the Neptune Advantage 12.01 Probe.

Can I keep using my existing charger with this 3.6 V replacement battery?

The battery operates at 3.6 V with a 2000 mAh capacity and includes a fully decoded chip that works like the original, so your standard charger for the Neptune Advantage probe will charge it normally.

How can I verify the battery is working correctly after I install it?

After fitting the battery, run two or three full charge and discharge cycles; the probe should hold its rated 7.20 Wh capacity and power the emergency lighting for the expected duration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.