Cameron Sino 784H74 800mAh 4.8V Lithium-Ion Battery
Replaces DUAL-LITE emergency-lighting packs with a 4.8 V 800 mAh lithium-ion cell matching the original 784H74 dimensions
- Specifications100.00 x 28.60 x 14.40
- Typelithium_ion
- Battery Pack100.00 x 28.60 x 14.40
- Battery Typelithium_ion
- Battery Capacity800mAh / 3.84Wh
- Battery Voltage4.80 volts
- Compatible with DUAL-LITE emergency lighting models SEWLDGBE, SEWLDGWE, SEWLDRBE, SEWLDRWE, SEWLSGBE, SEWLSGWE, SEWLSRWE
- 800mAh 4.8V lithium-ion capacity delivers 3.84Wh runtime
- Dimensions 100.00 x 28.60 x 14.40mm fit original housing
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection
- ISO9001, RoHS and CE certified for safety compliance
Replacement Battery for DUAL-LITE Emergency Lighting
This Cameron Sino lithium-ion pack replaces the original 784H74 cell in DUAL-LITE SEWLDG, SEWLDR and SEWLSG series units. It delivers 4.8 volts and 800 milliampere-hours in a 100.00 by 28.60 by 14.40 millimetre form factor weighing 82.0 grams. The pack includes a decoded chip that communicates with the host unit exactly like the factory battery.
Upgrade from Degraded Original Cells
The jump is worth it when the existing pack no longer holds a full 3.84 watt-hour charge or shows voltage sag under load. A fresh cell restores the rated runtime and ensures the emergency luminaire meets its mandated duration without rewiring or firmware changes.
Limits of the 4.8 Volt Lithium-Ion Platform
The chemistry is rated for storage up to 60 degrees Celsius and must not be exposed to fire, water or physical disassembly. Performance stabilises after two or three full charge-discharge cycles, and a low-quality charger will shorten service life. No provision exists for series or parallel strings beyond the single-pack design.
Highlights
- Compatible with DUAL-LITE emergency lighting models SEWLDGBE, SEWLDGWE, SEWLDRBE, SEWLDRWE, SEWLSGBE, SEWLSGWE, SEWLSRWE
- 800mAh 4.8V lithium-ion capacity delivers 3.84Wh runtime
- Dimensions 100.00 x 28.60 x 14.40mm fit original housing
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection
- ISO9001, RoHS and CE certified for safety compliance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | SEWLDGBE, SEWLDGWE, SEWLDRBE, SEWLDRWE, SEWLSGBE, SEWLSGWE, SEWLSRWE |
| Part Number | 784H74, 93015994 |
| Specifications | 100.00 x 28.60 x 14.40 |
| Type | lithium_ion |
| Battery Pack | 100.00 x 28.60 x 14.40 |
| Battery Type | lithium_ion |
| Battery Capacity | 800mAh / 3.84Wh |
| Battery Voltage | 4.80 volts |
Questions about this item
Will the 100.00 x 28.60 x 14.40 mm dimensions fit my DUAL-LITE emergency light?
Yes, the pack matches the original 784H74 footprint exactly, so it slots into the SEWLDG and SEWLS series housings without modification.
What is the installation step people often miss when fitting this 4.8 V pack?
The decoded chip must click fully into the device connector; a loose plug prevents the light from recognising the new cell.
How many charge cycles before the 800 mAh capacity stabilises?
The manufacturer advises two or three full charge-and-discharge cycles for the lithium-ion cells to reach rated runtime.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



