We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular sealed lead-acid battery with wire connector, grey plastic casing

Cameron Sino 4-000-36 battery 700mAh 2.52Wh 3.6V

SKU CH-XBT3-X3WQD MPN 4-000-36

Replacement 700mAh 3.6V battery for Drummond Scientific Portable Pipet-Aid PK, XL and XP2 models

  • Compatible with Drummond Pipet-Aid PK, XL, XP2 models
  • 700 mAh capacity delivers 2.52 Wh at 3.6 V
  • Certified to ISO 9001, RoHS and CE standards
  • Built-in protection against overcharge, over-discharge and short circuit
  • Compact 44.80 x 25.10 x 18.00 mm size weighs 34.9 g

Compatible replacement battery

The Cameron Sino 4-000-36 is a direct replacement for Drummond Scientific Portable Pipet-Aid PK, XL and XP2 models. It matches the original part number 4-000-036 and uses a sealed lead-acid cell composition. A new fully decoded chip ensures the battery communicates with the device exactly like the original unit. The pack is certified to ISO 9001, RoHS and CE standards.

Build integration and installation

The battery measures 44.80 x 25.10 x 18.00 mm and weighs 34.9 g, fitting the existing compartment without modification. Installation requires only connecting the supplied connector to the device; many online videos demonstrate the straightforward process. It frees the pipette from mains dependency during routine laboratory work. Buyers needing a different voltage or capacity for other instruments should verify their device specifications first.

Thermals and power in use

Rated at 3.6 V with 700 mAh and 2.52 Wh, the cell delivers steady output for typical pipetting cycles. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits. The manufacturer advises against storage above 60 140 and warns never to disassemble the pack or expose it to fire or water. Performance stabilises after two or three full charge and discharge cycles.

Highlights

  • Compatible with Drummond Pipet-Aid PK, XL, XP2 models
  • 700 mAh capacity delivers 2.52 Wh at 3.6 V
  • Certified to ISO 9001, RoHS and CE standards
  • Built-in protection against overcharge, over-discharge and short circuit
  • Compact 44.80 x 25.10 x 18.00 mm size weighs 34.9 g

Specifications

Brandcameron sino
Model4-000-36, Pipet-Aid XL, Portable Pipet-Aid PK, Portable Pipet-Aid XL, Portable Pipet-Aid XP2
Part Number4-000-036

Questions about this item

How long will the 700mAh capacity last during continuous pipetting?

The 700mAh / 2.52Wh rating gives a finite charge; sustained use will drain it until the next recharge cycle.

Does the sealed lead-acid cell run hot or make noise during all-day operation?

Sealed lead-acid chemistry is silent and produces minimal heat at the 3.6V rating under normal load.

Which Drummond Scientific models must I already own for this 4-000-36 battery to fit?

It replaces the original pack in Portable Pipet-Aid PK, Portable Pipet-Aid XL and Portable Pipet-Aid XP2 units.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.