We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black lithium-ion power tool battery with side contacts

Cameron Sino 12V 2500mAh Li-ion Battery for Black & Decker

SKU CH-CWJ3-KJEBH

12 V 2500 mAh lithium-ion replacement for Black & Decker 12 V tools including BDCDMT112, EGBL108, GKC108, HPL106, LDX112 and PSL12

  • Specifications50.65 x 48.50 x 92.55
  • Battery Pack50.65 x 48.50 x 92.55
  • Battery Capacity2500 milliamp_hours
  • Battery Voltage12 volts
  • 2500 mAh capacity delivers longer runtime per charge
  • 0 V lithium-ion chemistry matches original tool requirements
  • Fits Black & Decker BDCDMT112, EGBL108, EGBL108KB, GKC108, HPL106, HPL10IM, HPL10RS, LDX112, LDX112C, PSL12 models
  • Replaces OEM part numbers BL1110, BL1310, BL1510, LB12, LBX12, LBXR12
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection safeguards cells

Replacement Battery for Black & Decker 12 V Tools

This Cameron Sino lithium-ion pack delivers 12 volts and 2500 milliamp hours for compatible Black & Decker cordless tools. It replaces original part numbers BL1110, BL1310, BL1510, LB12, LBX12 and LBXR12 across the listed model range. The pack measures 50.65 by 48.50 by 92.55 millimetres and weighs 180.2 grams. A built-in decoded chip communicates with the tool exactly like the original battery.

Capacity and Voltage Determine Compatibility

The single specification that decides fit is the 2500 milliamp hour capacity at 12.0 volts, matching the original BL1110 series rating of 30.00 watt hours. Buyers who need a different voltage or a higher capacity for extended runtime will not be served by this pack. Verify the part number on your existing battery before ordering.

Thermals and Protection in Normal Use

The battery integrates over-charge, over-discharge, over-voltage and short-circuit protection circuits that limit heat rise during typical operation. No active cooling is required and the pack runs silently. The supplier notes that optimal performance is reached after two or three full charge cycles. Do not store the unit above 60 degrees Celsius.

Highlights

  • 2500 mAh capacity delivers longer runtime per charge
  • 0 V lithium-ion chemistry matches original tool requirements
  • Fits Black & Decker BDCDMT112, EGBL108, EGBL108KB, GKC108, HPL106, HPL10IM, HPL10RS, LDX112, LDX112C, PSL12 models
  • Replaces OEM part numbers BL1110, BL1310, BL1510, LB12, LBX12, LBXR12
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection safeguards cells

Specifications

BrandCameron Sino
ModelBDCDMT112, EGBL108, EGBL108KB, GKC108, HPL106, HPL10IM, HPL10RS, LDX112, LDX112C, PSL12
Part NumberBL1110, BL1310, BL1510, LB12, LBX12, LBXR12
Specifications50.65 x 48.50 x 92.55
Battery Pack50.65 x 48.50 x 92.55
Battery Capacity2500 milliamp_hours
Battery Voltage12 volts

Questions about this item

How long will the 2500mAh capacity run my Black & Decker 12V drill?

The 2500mAh rating equals 30.00Wh at 12.0V, so runtime depends on the tool's current draw; a 5A load would yield roughly 30 minutes of continuous use.

Does the replacement pack use the same slide-on interface as the original BL1110 battery?

Yes, it matches the Black & Decker 12V slide-style connector used on models such as the LDX112 and PSL12, so it clicks into the tool and charger without adapters.

Will the 50.65 x 48.50 x 92.55mm dimensions fit my LDX112C battery bay?

Those exact millimetre dimensions replicate the OEM LBXR12 pack, so the battery seats flush in the LDX112C and all other listed 12V Black & Decker tools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.