We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black power-tool battery with yellow label and slide-on contacts

Cameron Sino 101260 3000mAh battery for Craftsman power tools

SKU CH-B6FV-WFSSR MPN 101260

Replacement 3000 mAh 19.2 V battery fits many Craftsman power-tool models

  • 3000mAh capacity powers tools longer between charges
  • 20V voltage matches original Craftsman specifications
  • ISO9001, RoHS and CE certified for safety compliance
  • 60 x 82.40 x 112.10mm dimensions fit listed models precisely
  • Fully decoded chip works like the original battery

Replacement battery for Craftsman tools

This 19.20 V, 3000 mAh lithium-ion pack replaces the original Craftsman 101260, 101540 and 175980 cells. It fits a long list of drill, driver and saw models including the CLED1000, CR2600 and FS2600. The fully decoded chip communicates with the tool exactly like the factory unit. Condition is new and the pack carries ISO 9001, RoHS and CE certification.

Build quality and daily fit

The pack measures 137.60 x 82.40 x 112.10 mm and weighs 656.0 g, matching the OEM footprint so it seats securely in the tool's battery bay. A new fully decoded chip works just like the original, ensuring correct charge reporting and thermal protection. Installation videos are widely available and the connector layout mirrors the factory design for a straightforward swap.

Compatibility checklist before ordering

Verify the model number on your tool and the part number on your old battery against the supported list, which includes 11371, 11374, 11375, 11376, 130285003 and the PP2000 series. Ensure the connector is properly seated when fitting the pack. Note that a new battery reaches peak capacity after two or three full charge and discharge cycles.

Highlights

  • 3000mAh capacity powers tools longer between charges
  • 20V voltage matches original Craftsman specifications
  • ISO9001, RoHS and CE certified for safety compliance
  • 60 x 82.40 x 112.10mm dimensions fit listed models precisely
  • Fully decoded chip works like the original battery

Specifications

BrandCameron Sino
Model101260, 101540, 101541, 110470, 113450, 113910, 113911, 113912, 113913, 114070, 114071, 114072, 114073, 114170, 114260, 114261, 114271, 114280, 114281, 114480, 114832, 114840, 114851, 114852, 114853, 115120, 115122, 115160, 115410, 115430, 115440, 115510, 11561, 115690, 115700, 115701, 115710, 115740, 115760, 115780, 115790, 115800, 115810, 115820, 115830, 115850, 115860, 115920, 115930, 115940, 115950, 115970, 116020, 116060, 116400, 116890, 119100, 175980, 34130, CLED1000, COHR1000, CR2000, CR2100, CR2600, CRS1000, CS2400, FS2600, ID2000, SS630
Part Number11371, 11374, 11375, 11376, 130285003, 17300, PP2000, PP2010, PP2011, PP2020, PP2025, PP2030

Questions about this item

What voltage does the 3000mAh 19.20 V battery deliver to the tool?

The pack supplies 19.20 volts, matching the original Craftsman specification for compatible models.

Will the 137.60 x 82.40 x 112.10 mm case fit my Craftsman drill?

Those dimensions match the OEM battery bay on listed Craftsman models such as the CR2000 and CS2400.

How do I install the replacement and what step is often missed?

Slide the pack into the tool until the latch clicks, then verify the decoded chip contacts seat fully — partial insertion causes no power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.