Cameron & Co
Cameron & Co DS-CS-DEW613PW 14.4V 1.5Ah Ni-MH battery
14.4 V 1.5 Ah Ni-MH replacement battery for DeWalt tools and flashlights
- Powers DeWalt 14.4 V tools with 1.5 Ah Ni-MH capacity
- Replaces original DeWalt packs including DC9091, DC9096, DC9099
- Fits over 50 DeWalt drill, driver and flashlight models
- Yellow-and-black housing matches factory look for easy identification
- Brand-new, 100 % OEM-compatible unit ready for immediate use
Cameron & Co 14.4V Ni-MH Battery for DeWalt
This 14.4V 1.5Ah nickel-metal hydride battery replaces DeWalt packs such as DC9071, DC9091, DC9096 and DC9099. It fits a wide range of DeWalt cordless tools and flashlights including the DC528, DC551KA, DC612KA and DC728KA models. The yellow and black housing matches the original equipment colour scheme.
Steady output during extended use
Ni-MH chemistry delivers consistent voltage across the discharge curve, so drills, drivers and lights maintain torque and brightness until the pack is nearly empty. The 1500mAh capacity supports prolonged fastening or illumination tasks without the sharp voltage drop seen in some older chemistries. No memory effect means the battery can be topped up at any state of charge.
OEM-compatible fit and rugged construction
The pack measures 114 x 80 x 108 mm and slides securely into the tool’s battery bay, engaging the same latch mechanism as genuine DeWalt units. Durable yellow and black plastic resists jobsite knocks, dust and occasional splashes. Terminals are arranged to match part numbers 152250-27, 397745-01 and the DE9037 series for reliable electrical contact.
Highlights
- Powers DeWalt 14.4 V tools with 1.5 Ah Ni-MH capacity
- Replaces original DeWalt packs including DC9091, DC9096, DC9099
- Fits over 50 DeWalt drill, driver and flashlight models
- Yellow-and-black housing matches factory look for easy identification
- Brand-new, 100 % OEM-compatible unit ready for immediate use
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-DEW613PW |
Questions about this item
Does the 14.4V 1.5Ah Ni-MH pack run warm when powering a DeWalt DC925 drill all day?
Ni-MH chemistry produces moderate heat under continuous load; the pack is rated for 1500mAh at 14.4V so extended use will warm the cells but stays within normal operating limits.
Which DeWalt tool or charger must I already own for this DS-CS-DEW613PW to work?
It fits DeWalt 14.4V tools such as the DC925, DC935, DC985 or DW988 and charges on any DeWalt 14.4V Ni-MH charger that accepts part numbers 9091, 9096 or DE9037.
Will this 1500mAh Ni-MH battery keep up with older DeWalt 12V tools I still use?
No — the pack delivers 14.4V and is only compatible with the 14.4V DeWalt models listed such as DC920, DC984 or DW996; it will not fit or power 12V tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



