We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red rectangular Ni-MH battery pack for Cattron Theimeg LRC remote control

Cameron & Co

Cameron & Co Battery for Cattron Theimeg LRC Red 2.0Ah

SKU CH-FQBV-M0N6X

Ni-MH 4.8V 2000mAh replacement battery fits Cattron Theimeg LRC, LRC-L and LRC-M crane remotes

  • Battery TypePower Tool
  • Ni-MH chemistry delivers reliable 2.0 Ah capacity for crane remotes
  • 8 V 2000 mAh rating matches original 1BAT-7706-A201 specification
  • Direct fit for Cattron Theimeg LRC, LRC-L and LRC-M models
  • Red housing identifies the pack at a glance on site
  • 30 x 62.00 x 33.10 mm form factor slides into existing battery bay

Cameron Sino Battery for Cattron Theimeg LRC

The Cameron Sino DS-CS-CBT771BL is a nickel-metal-hydride power-tool battery built for Cattron Theimeg LRC, LRC-L and LRC-M crane controllers. It replaces part numbers 1BAT-7706-A201 and BE023-00122 with a 2.0 Ah capacity at 4.8 V. The red pack is supplied new and fully OEM compatible.

Ni-MH chemistry limits and charging practice

Nickel-metal-hydride cells deliver 9.60 Wh from the 2000 mAh rating and perform best when charged before deep discharge. The chemistry tolerates frequent top-ups but does not support the rapid charge rates or high energy density of lithium systems. Users needing longer runtime per shift or lighter weight will find this chemistry restrictive.

Red housing dimensions and daily handling

The pack measures 79.30 x 62.00 x 33.10 mm and uses the original slide-on connector profile for the LRC series. The red casing aids quick identification on a busy job site and the compact footprint keeps the controller balanced during extended crane operation. Build quality matches OEM latch tolerances for secure fit.

Highlights

  • Ni-MH chemistry delivers reliable 2.0 Ah capacity for crane remotes
  • 8 V 2000 mAh rating matches original 1BAT-7706-A201 specification
  • Direct fit for Cattron Theimeg LRC, LRC-L and LRC-M models
  • Red housing identifies the pack at a glance on site
  • 30 x 62.00 x 33.10 mm form factor slides into existing battery bay

Specifications

BrandCameron Sino
ModelDS-CS-CBT771BL
Battery TypePower Tool

Questions about this item

Which capacity fits my Cattron Theimeg LRC remote?

This pack is rated at 2.0 Ah (2000 mAh) and 4.8 V, matching the original 1BAT-7706-A201 and BE023-00122 part numbers for LRC, LRC-L and LRC-M units.

What runtime does the 9.60 Wh rating give in use?

At 4.8 V the pack stores 9.60 Wh; a 1 A load would run for about two hours, with actual time depending on the remote's power draw and operating temperature.

Does the Ni-MH chemistry limit charging or device compatibility?

The battery uses Ni-MH cells at 4.8 V, so it must be charged with a Ni-MH compatible charger and will only work in devices designed for that voltage and chemistry.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.