We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Shielded eSATA to eSATA cable, 3 ft, black connectors

CableMAX

CableMAX CA-2ESSQ eSATA to eSATA cable 3 ft

SKU CH-ZPZK-57MK2

A 3-foot shielded eSATA cable linking two eSATA ports for external SATA storage with sustained transfer performance

  • Length3 ft.
  • 3 ft cable fits tight workspaces easily
  • eSATA to eSATA links drive enclosure to host port
  • Triple shielding protects signal integrity
  • Supports SATA II sustained and burst transfer rates
  • Type I 7-pin connectors ensure secure fit

Cable purpose and audience

The CableMAX CA-2ESSQ is a three-foot shielded eSATA to eSATA cable built for external SATA II storage enclosures. It connects a host controller to an external drive using identical Type I 7-pin connectors on both ends. Triple shielding preserves sustained and burst transfer rates up to the SATA II specification. The cable targets users adding or replacing an external eSATA link.

Fit and limits

This cable suits builders linking an eSATA host card to a single external SATA II enclosure at close range. It will not help users whose devices use USB or internal SATA ports, nor those needing a longer reach than three feet. Installations requiring right-angle plugs, locking latches or SATA III 6 Gb/s certified performance should look at other options.

Deciding specification

The defining detail is the eSATA Type I 7-pin interface on both ends, which only mates with matching eSATA ports. If the host or enclosure uses a different connector — such as internal SATA, USB or a newer eSATA variant — this cable cannot be used.

Highlights

  • 3 ft cable fits tight workspaces easily
  • eSATA to eSATA links drive enclosure to host port
  • Triple shielding protects signal integrity
  • Supports SATA II sustained and burst transfer rates
  • Type I 7-pin connectors ensure secure fit

Specifications

ModelCA-2ESSQ
Length3 ft.

Questions about this item

Does my enclosure need an eSATA Type I 7-pin port to use this cable?

Yes, both ends are eSATA Type I 7-pin connectors, so the enclosure and the host card or motherboard must each present that same port.

Will this cable limit the speed of an older SATA II external drive enclosure?

No, it is rated for SATA II 3 Gbit/s and carries the signal without loss, so the enclosure will run at its native SATA II rate.

How can I confirm the link is running at full SATA II speed after connecting the cable?

Check the host controller or operating-system disk utility — it should report a 3 Gbit/s negotiated link rate for the attached enclosure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.