We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 10ft Cat6a ethernet cable, ultra-slim 4.0mm jacket, RJ45 connectors

Cable Leader

Cable Leader Cat6a network ethernet cable 10ft 28AWG 4.0mm Blue

SKU CH-1J95-16RTS

A slim 4.0 mm Cat6a patch cable with 28 AWG bare copper conductors delivers 10 Gigabit speeds at 500 MHz over 10 ft for dense racks

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorBlue

Length 10ft

Show 7 more configurations

Color Blue

  • 10 Gbps Cat6a performance at 500 MHz
  • Ultra-slim 4.0 mm jacket saves rack space
  • 28 AWG bare copper with gold-plated contacts
  • Snagless boot protects clip in dense bundles
  • Backward compatible with Cat6 and Cat5e networks

Ultra-slim Cat6a patch cable for dense racks

This 10 ft Cat6a Ethernet cable uses a 4.0 mm jacket and 28 AWG bare copper conductors to deliver 10 Gigabit speeds at 500 MHz. It fits high-density patch panels, server racks and data centre cabinets where standard 6.9 mm cords would crowd airflow and bend radius. The blue colour helps identify links at a glance.

Drop-in upgrade from Cat6 or Cat5e

The cable supports 10GBASE-T up to 100 m and is fully backward compatible with existing Cat6 and Cat5e infrastructure. Swapping older patch cords for this slim design reclaims rack space and improves cooling without replacing switches, routers or keystone jacks. The jump is worth it whenever density or thermal headroom limits moves, adds and changes.

Snagless boot and gold contacts for reliable routing

Each end carries an 8P8C RJ45 plug with 50-micron gold-plated contacts and a transparent slim snagless boot that protects the locking clip during frequent re-patching. Four twisted pairs reduce crosstalk, while RoHS compliance and UL (E305668) with ETL verification confirm the build quality. It works with PoE devices, NAS and servers using standard RJ45 ports.

Highlights

  • 10 Gbps Cat6a performance at 500 MHz
  • Ultra-slim 4.0 mm jacket saves rack space
  • 28 AWG bare copper with gold-plated contacts
  • Snagless boot protects clip in dense bundles
  • Backward compatible with Cat6 and Cat5e networks

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorBlue
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much clearance does the 4.0 mm jacket need behind a patch panel?

The 4.0 mm outer diameter fits tight bend radii behind dense patch panels, leaving more room per rack unit than standard 6.9 mm Cat6a cords.

What is the correct way to seat the RJ45 plugs so the locking clip stays protected?

Push each 8P8C plug straight in until the clip clicks; the transparent slim snagless boot then shields the clip from catching on adjacent cables during routing.

When should the cable be replaced if the gold-plated contacts wear?

The 50-micron gold plating on the RJ45 contacts resists corrosion; replace the patch cord only if a link drops below 10GBASE-T performance or the boot and clip are physically damaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.