We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin blue Cat6a Ethernet cable with RJ45 connectors, 35ft length, 4.0mm diameter

Cable Leader

Cable Leader 35ft Cat6a Slim Ethernet Cable 28AWG Blue

SKU CH-YJ6A-2968K

A 35 ft Cat6a slim patch cable with 28 AWG conductors and 4.0 mm jacket for 10 GbE up to 100 m at 500 MHz

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length35 ft.
  • ColorBlue

Length 35ft

Show 7 more configurations

Color Blue

  • 10 Gigabit speeds over 100 metres at 500 MHz
  • Slim 4.0 mm jacket fits dense patch panels and racks
  • 28 AWG bare copper with 50-micron gold contacts
  • Snagless boot protects clip during routing and re-patching
  • Backward compatible with Cat6 and Cat5e equipment

Cable Leader 35ft Cat6a Slim Patch Cable

This 35-foot Cat6a Ethernet cable provides a 10 Gigabit wired link in a slim 4.0 mm blue jacket. It meets the Cat6a standard at 500 MHz and runs 10GBASE-T up to 100 meters. The cord is backward compatible with Cat6 and Cat5e networks for a direct drop-in upgrade without hardware changes.

Ultra-slim 28AWG design for dense racks

The 28 AWG bare copper conductors and 4.0 mm outer diameter fit more cables per rack unit than standard 6.9 mm cords. Tight bend radii stay manageable behind crowded patch panels while airflow improves across switches and servers. Gold-plated 50-micron contacts on 8P8C RJ45 plugs resist corrosion and maintain signal integrity with reduced crosstalk.

Check port spacing and boot clearance

Verify that your patch panel or keystone jack spacing accepts the transparent slim snagless boots protecting each locking clip. Ensure the 35-foot length matches the run between your switch, router, server or NAS without excess slack. The cable is unshielded UTP and carries UL E305668 and ETL verification for safety compliance.

Highlights

  • 10 Gigabit speeds over 100 metres at 500 MHz
  • Slim 4.0 mm jacket fits dense patch panels and racks
  • 28 AWG bare copper with 50-micron gold contacts
  • Snagless boot protects clip during routing and re-patching
  • Backward compatible with Cat6 and Cat5e equipment

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length35 ft.
ColorBlue
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 50-micron gold-plated RJ45 contacts need re-termination over time?

The 50-micron gold plating resists corrosion and maintains low-resistance contact, so re-termination is not expected under normal patch-panel use.

Does the 4.0 mm jacket reach its bend-radius limit before a standard 6.9 mm Cat6a cable in a 35 ft run?

The slimmer 4.0 mm jacket allows tighter bends behind dense patch panels, so its practical bend-radius limit is reached later than on a 6.9 mm cable.

How much heat does the 28 AWG bare copper add when the cable carries PoE all day?

The 28 AWG bare copper conductors are rated for the Cat6a 500 MHz standard and PoE devices, with no extra heat spec beyond normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.