We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue ultra-slim 14 ft Cat6a RJ45 cable 4.0 mm jacket 28 AWG

Cable Leader

Cable Leader Cat6a 14ft 28AWG Slim network ethernet cable

SKU CH-MGCM-RQNSK

A 14ft Cat6a patch cable with a 4.0mm slim jacket for 10 Gigabit networking in dense racks

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length14 ft.
  • ColorBlue

Length 14ft

Show 7 more configurations

Color Blue

  • 10 Gbps wired speed over 100 m at 500 MHz
  • Slim 4.0 mm jacket fits dense racks better than 6.9 mm cords
  • 28 AWG bare copper with 50 µm gold contacts cuts crosstalk
  • Snagless boot protects the clip during frequent re-patching
  • Backward compatible with Cat6 and Cat5e for instant drop-in upgrades

Slim Cat6a patch cable for dense racks

The Cable Leader 14ft Cat6a ethernet cable is built for installers and network managers who run high-density patch panels, server racks or data-centre cabinets and need a reliable 10 Gigabit link without the bulk of standard cords. Its 4.0 mm jacket is far thinner than typical 6.9 mm Cat6a cables, so more runs fit per rack unit and airflow stays clear.

28 AWG bare copper with gold-plated RJ45

Four twisted pairs of 28 AWG bare copper terminate in 8P8C plugs carrying 50-micron gold-plated contacts, giving low-resistance, corrosion-resistant connections and reduced crosstalk at 500 MHz. A transparent slim snagless boot protects the locking clip during routing and re-patching, keeping dense bundles tidy and the clip intact through frequent moves, adds and changes.

Check port spacing and PoE budget before ordering

The ultra-slim profile eases routing in tight patch panels, but verify that your keystone jacks, switch ports or panel cut-outs accept the reduced boot diameter without interference. Because the conductors are 28 AWG, confirm that your PoE devices and power sourcing equipment remain within the cable's current-carrying limits for the intended run length. The cable is RoHS compliant and carries UL E305668 plus ETL verification for safety assurance.

Highlights

  • 10 Gbps wired speed over 100 m at 500 MHz
  • Slim 4.0 mm jacket fits dense racks better than 6.9 mm cords
  • 28 AWG bare copper with 50 µm gold contacts cuts crosstalk
  • Snagless boot protects the clip during frequent re-patching
  • Backward compatible with Cat6 and Cat5e for instant drop-in upgrades

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length14 ft.
ColorBlue
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the Cat6a 500MHz rating actually limit in real use?

The Cat6a standard caps 10GBASE-T at 100 meters, so this 14ft run is well within the supported distance for full 10 Gigabit throughput.

Will the 4.0mm slim jacket and 28AWG wires fit standard keystone jacks and patch panels?

Yes, the RJ45 plugs use standard 8P8C dimensions and the slim boot is designed for high-density panels, so it seats normally in keystone jacks and rack patch panels.

How do you seat the snagless boot without bending the locking clip?

Push the connector straight in until the clip clicks; the transparent slim boot covers the clip so you press the boot body, not the clip itself, avoiding the common mistake of lifting the clip during insertion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.