We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6a Ethernet cable 35ft with RJ45 connectors and snagless boots

Cable Leader

Cable Leader Cat6a Ethernet Cable 35ft 10 Gigabit 500MHz 24AWG Black

SKU CH-ZMGT-SA3M5

A 35 ft Cat6a patch cable rated for 10 Gigabit at 500 MHz with 24 AWG bare copper conductors and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length35 ft.
  • ColorBlack

Length 35ft

Show 9 more configurations

Color Black

  • 10 Gbps wired speed for lag-free gaming and streaming
  • Cat6a 500 MHz bandwidth supports 10GBASE-T up to 100 m
  • 24 AWG bare copper with cross-spline core cuts crosstalk
  • 50-micron gold-plated RJ45 contacts resist corrosion
  • Snagless 6.9 mm PVC boot protects the locking clip

What the cable is and who it fits

This 35ft Cat6a patch cable uses 24AWG stranded bare copper conductors and gold-plated RJ45 connectors to deliver 10 Gigabit speeds at 500MHz. It is built for gamers and home-office users who want a stable wired link for a PS5, Xbox, gaming PC or NAS without running new infrastructure. The snagless boot protects the locking clip during routing behind desks or through tight trunking.

Installing it and common pitfalls

The cable plugs straight into any RJ45 port on routers, switches, modems, PoE injectors, consoles or patch panels with no configuration required. Because it is unshielded UTP, avoid running it parallel to power cables or fluorescent ballasts to prevent induced noise. The 6.9mm outer diameter is stiff enough to hold a route but flexible enough for corner bends; do not kink it tighter than the spline allows.

The spec that decides fit

The cable is rated for 10GBASE-T up to 100 metres at 500MHz, so the 35ft length is well within the full-performance envelope. If your switch or network card only negotiates 1 Gigabit, the cable will still work at that speed but you will not gain the 10 Gigabit headroom. Buyers who need shielded construction for electrically noisy environments should look elsewhere.

Highlights

  • 10 Gbps wired speed for lag-free gaming and streaming
  • Cat6a 500 MHz bandwidth supports 10GBASE-T up to 100 m
  • 24 AWG bare copper with cross-spline core cuts crosstalk
  • 50-micron gold-plated RJ45 contacts resist corrosion
  • Snagless 6.9 mm PVC boot protects the locking clip

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length35 ft.
ColorBlack
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the 35 ft Cat6a cable is delivering a 10 Gigabit link after I plug it in?

Check the link speed shown in your router, console or PC network settings — it should read 10 Gbps or 10GBASE-T when both ends support that rate.

What comes with the 35 ft Cat6a cable and is anything else needed to use it?

The package contains the single 35 ft patch cable with RJ45 connectors on both ends; no additional parts are required for a standard wired connection.

Which cable specification should I choose for a 10 Gigabit run up to 100 meters at 500 MHz?

Select this Cat6a 24 AWG stranded bare copper cable with gold-plated contacts — it meets the 500 MHz bandwidth and 10GBASE-T distance rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.