We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader Cat6a 6in 28AWG Slim Ethernet Cable Yellow

SKU CH-V7RX-345X5

Ultra-slim 6-inch Cat6a patch cable supports 10 Gigabit Ethernet at 500 MHz with 28 AWG bare copper conductors and gold-plated RJ45 contacts for dense rack deployments

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length6 in.
  • ColorYellow

Length 6in

Show 7 more configurations

Color Yellow

  • 10 Gigabit speed with Cat6a 500 MHz performance
  • Ultra-slim 4.0 mm jacket saves rack space and improves airflow
  • 28 AWG bare copper with 50-micron gold-plated contacts for signal integrity
  • Snagless boot protects locking clip during dense routing
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Cable Leader 6in Cat6a Slim Patch Cable

This 6-inch Cat6a Ethernet cable provides a 10 Gigabit wired link in a compact yellow form factor. It is built for patch panels, server racks and data centre cabinets where space is limited. The ultra-slim 4.0 mm jacket fits high-density environments without blocking airflow. Backward compatibility with Cat6 and Cat5e makes it a drop-in upgrade for existing RJ45 networks.

28AWG bare copper conductors at 500MHz

The single specification that decides fit is the 28AWG conductor gauge combined with a 500MHz Cat6a rating. Thinner 28AWG wires allow the 4.0 mm overall diameter, yet the cable still meets the 10GBASE-T standard up to 100 metres. Installers needing maximum cables per rack unit should verify the 28AWG gauge matches their patch panel termination requirements before ordering.

Gold-plated contacts and snagless boot

Each RJ45 plug carries 50-micron gold-plated contacts for low-resistance, corrosion-resistant connections across four twisted pairs. The transparent slim snagless boot protects the locking clip during routing and re-patching, keeping dense bundles tidy. UL (E305668) and ETL verification plus RoHS compliance confirm the cable meets recognised safety and environmental standards for data centre deployment.

Highlights

  • 10 Gigabit speed with Cat6a 500 MHz performance
  • Ultra-slim 4.0 mm jacket saves rack space and improves airflow
  • 28 AWG bare copper with 50-micron gold-plated contacts for signal integrity
  • Snagless boot protects locking clip during dense routing
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length6 in.
ColorYellow
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 10 Gigabit rating actually deliver in a live rack?

It runs 10GBASE-T at up to 100 metres and 500 MHz on Cat6a, so any switch or server port that negotiates 10 Gb/s will hold that speed end-to-end.

How does the Cat6a shielded or unshielded design affect the 500 MHz ceiling?

This cable is unshielded UTP, yet still meets the Cat6a 500 MHz channel spec; the 28 AWG twisted pairs and gold-plated contacts keep crosstalk low enough for the full 10 Gb/s bandwidth.

Will the 4.0 mm jacket and 28 AWG wire fit my 1U patch panel without blocking adjacent ports?

Yes — the 4.0 mm outer diameter is far slimmer than standard 6.9 mm Cat6a, so multiple cables sit side-by-side in dense 1U panels and the snagless boot protects the clip during tight routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.