We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ultra-slim 4.0 mm gray Cat6a patch cable with clear snagless boots, 1 ft long

Cable Leader

Cable Leader Cat6a 1ft 28AWG 4.0mm Slim Gray Ethernet Cable

SKU CH-S42H-5T7EG

A 1ft Cat6a patch cable with a 4.0mm slim jacket and 28AWG conductors for 10 Gigabit networking in dense racks

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorGray

Length 1ft

Show 7 more configurations

Color Gray

  • 10 Gigabit speed over 100 metres at 500 MHz
  • Ultra-slim 4.0 mm jacket saves rack space and airflow
  • 28 AWG bare copper with 50-micron gold RJ45 contacts
  • Snagless boot protects clips during dense patching
  • Backward compatible with Cat6 and Cat5e networks

Ultra-slim Cat6a patch cord

The Cable Leader Cat6a 1ft cable delivers 10 Gigabit Ethernet in a 4.0mm jacket that is far thinner than standard 6.9mm cords, making it ideal for high-density patch panels, server racks and data center cabinets where space and airflow are at a premium. It uses 28AWG bare copper conductors with 50-micron gold-plated RJ45 contacts for reliable signal integrity.

Capacity and headroom

Rated for 10GBASE-T up to 100 meters at 500MHz on the Cat6a standard, the cable handles full 10 Gigabit throughput across standard channel lengths and remains backward compatible with Cat6 and Cat5e equipment for a drop-in upgrade. The slim 28AWG construction keeps bend radii tight behind dense panels while the snagless boot protects the locking clip during frequent re-patching.

When the upgrade makes sense

This cord replaces bulkier Cat6a or Cat6 patch leads when rack density, cable management or cooling demand a smaller diameter without sacrificing 10 Gigabit performance. It is not suited for runs that exceed the 100-meter channel limit or for installations that require shielded cable for EMI protection. Builders needing longer lengths or shielded variants should select a different cable type.

Highlights

  • 10 Gigabit speed over 100 metres at 500 MHz
  • Ultra-slim 4.0 mm jacket saves rack space and airflow
  • 28 AWG bare copper with 50-micron gold RJ45 contacts
  • Snagless boot protects clips during dense patching
  • Backward compatible with Cat6 and Cat5e networks

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorGray
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 4.0mm Cat6a cable fit alongside my existing 6.9mm Cat6a cords in the same patch panel?

Yes, the 4.0mm jacket is far thinner than standard 6.9mm Cat6a cords so more cables fit per rack unit and bend radii stay tight behind dense panels.

How can I verify the 10GBASE-T link is running at 500MHz after I connect it?

Check the switch or server port status — it should show a 10 Gbps link speed and the Cat6a 500MHz rating supports 10GBASE-T up to 100 meters.

Does the 1ft gray cable come with the 50-micron gold-plated RJ45 plugs already attached or do I need to buy connectors separately?

The cable ships with 8P8C RJ45 plugs terminated on both ends, each featuring 50-micron gold-plated contacts and a transparent slim snagless boot.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.