We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow ultra-slim Cat6a Ethernet cable, 50 ft, 4.0 mm jacket, RJ45 connectors

Cable Leader

Cable Leader 50ft Cat6a Slim Ethernet Cable 28AWG Yellow

SKU CH-8H58-QGQW9

Ultra-slim 4.0 mm Cat6a patch cable supports 10 Gbit/s at 500 MHz over 50 ft with 28 AWG bare copper and gold-plated RJ45 contacts

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length50 ft.
  • ColorYellow

Length 50ft

Show 7 more configurations

Color Yellow

  • 10 Gbps Cat6a performance up to 100 m at 500 MHz
  • Ultra-slim 4.0 mm jacket saves rack space and improves airflow
  • 28 AWG bare copper with 50-micron gold-plated RJ45 contacts
  • Snagless boot protects locking clips during dense routing
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Slim 10G patch cable for dense racks

This 50-foot Cat6a cable delivers 10 Gigabit Ethernet in a 4.0 mm jacket that is far thinner than standard 6.9 mm cords. It is built for high-density patch panels, server racks and data center cabinets where space and airflow are at a premium. The 28 AWG bare copper conductors and 500 MHz rating support 10GBASE-T up to 100 metres while remaining backward compatible with Cat6 and Cat5e equipment.

Passive cable with no active cooling

The unshielded UTP construction has no fan or power draw, so it adds no noise or heat to the installation. Its slim profile improves airflow around switches and servers, helping to reduce heat build-up in busy data center and server room deployments. Gold-plated contacts keep resistance low without requiring any external power.

Snagless boot eases daily moves

Transparent slim snagless boots protect the locking clips from catching during routing and re-patching, keeping dense bundles tidy. The 50-micron gold-plated RJ45 plugs on both ends provide corrosion-resistant connections for switches, routers, patch panels, keystone jacks, PoE devices, servers and NAS units. UL (E305668) and ETL verification plus RoHS compliance confirm the build quality.

Highlights

  • 10 Gbps Cat6a performance up to 100 m at 500 MHz
  • Ultra-slim 4.0 mm jacket saves rack space and improves airflow
  • 28 AWG bare copper with 50-micron gold-plated RJ45 contacts
  • Snagless boot protects locking clips during dense routing
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length50 ft.
ColorYellow
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I route the 4.0 mm slim Cat6a cable through a high-density patch panel without snagging the locking clip?

The transparent slim snagless boot covers the clip so the 28AWG cord slides past neighbouring patch cables; push the boot fully home until the clip clicks.

Will the 50-micron gold-plated RJ45 contacts need cleaning or re-termination over time?

Gold plating resists corrosion; the contacts are rated for the life of the cable and do not require periodic cleaning or re-termination under normal indoor use.

At what distance does the 500 MHz Cat6a link drop below 10 Gbit/s during sustained traffic?

The Cat6a standard guarantees 10GBASE-T up to 100 metres; this 50 ft run stays well within that limit, so sustained throughput remains at 10 Gbit/s.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.