We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 ft locking power cord with twist-lock NEMA L5-15P plug to C13 connector, SJT jacketed 14 AWG cable

Cable Leader

Cable Leader 8ft NEMA L5-15P to C13 Locking Power Cord 14 AWG 15A 125V Black

SKU CH-QZ5N-0NGPH

An 8 ft locking cord with a twist-lock NEMA L5-15P plug and C13 connector, 14 AWG rated 15A at 125V for secure server and PDU power

  • Length8 ft.

Length 8ft

  • Secure twist-lock plug prevents accidental disconnection in racks
  • 14 AWG copper conductors support 15A at 125V for server loads
  • SJT jacket rated 105C and 300V withstands data-centre heat
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Black jacket simplifies circuit identification in dense cabinets

Secure Rack Power

This eight-foot locking cord connects a NEMA L5-15P twist-lock plug to a standard C13 inlet. It is built for servers, PDUs and rack-mounted gear that must stay powered even when vibration or cable movement would pull a regular plug loose. The 14 AWG SJT jacket carries three grounded copper conductors rated for 15 amps at 125 volts.

Upgrade From Standard Cords

A non-locking C14-to-C13 lead can disconnect under rack vibration or during maintenance, causing unexpected downtime. Switching to this twist-lock assembly is worth it whenever the outlet is an L5-15R and the equipment cannot tolerate an accidental power loss. The heavier 14 AWG gauge also replaces thinner 16 or 18 AWG cables that are only rated for 13 or 10 amps respectively.

Sustained Load Behaviour

The SJT jacket is rated for continuous operation at 105 degrees Celsius and 300 volts, so the insulation remains stable during long periods at the full 15-amp rating. UL listing and CSA certification (file E210037) confirm the cable meets North American safety standards for continuous rack use. RoHS compliance means no restricted hazardous substances are present in the materials.

Highlights

  • Secure twist-lock plug prevents accidental disconnection in racks
  • 14 AWG copper conductors support 15A at 125V for server loads
  • SJT jacket rated 105C and 300V withstands data-centre heat
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Black jacket simplifies circuit identification in dense cabinets

Specifications

Length8 ft.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 8 ft length reach from my floor-mounted PDU to a mid-rack server?

The cord is 8 ft long; measure your rack height and PDU position to confirm reach before ordering.

How do I engage the twist-lock on the NEMA L5-15P plug so it will not pull loose?

Insert the plug fully, then rotate clockwise until it clicks into the locked position; the locking tabs must seat completely.

When should I replace this 14 AWG SJT cable in a 125 V server rack?

Inspect the jacket and connectors regularly; replace if you see cracking, discoloration, heat damage or if the lock no longer holds securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.