We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver dual-action airbrush with .3mm nozzle and 7cc gravity-feed cup

POINTZERO

POINTZERO PZ-260 Dual-action Airbrush .3mm Nozzle 7cc Gravity-feed

SKU CH-WEMW-MEMGA

A dual-action gravity-feed airbrush with a 0.3 mm nozzle and 7 cc cup for fine detail work

  • Craft TypeCraft Accessories
  • ColorSilver
  • Dual-action trigger controls air and fluid independently
  • 3 mm nozzle produces hairline to 1.25" spray patterns
  • Gravity-feed 7cc cup with vented anti-spill cover
  • Balanced precision body with needle backstop for consistent lines
  • Includes 7 exclusive downloadable airbrushing guides

What the PZ-260 airbrush does

The PZ-260 is a dual-action, internal-mix airbrush with a pre-installed 0.3 mm nozzle and a 7 cc gravity-feed cup. Pressing the trigger releases air while pulling it back controls fluid flow for fine atomisation. The precision body balances well in hand and includes a needle backstop for repeatable line widths. It suits hobbyists, cake decorators and artists needing detail from hairline up to 1.25 inches.

Check your air supply first

You need a compressor or tank that can deliver a steady working pressure between 15 and 50 psi through a standard 1/8 inch BSP fitting. Verify your hose has the matching thread or plan to use the included barbed connector. The solvent-resistant needle packing handles most spraying mediums, so confirm your chosen paint or finish is compatible with that seal. No electrical connection is required.

Thermals noise and power draw

The airbrush itself has no motor, fan or heating element, so it produces no heat, no electrical noise and draws no power. All sound and energy use come from the external compressor you supply. In normal spraying sessions the body stays at ambient temperature and the only audible sound is the air rushing through the 0.3 mm tip.

Highlights

  • Dual-action trigger controls air and fluid independently
  • 3 mm nozzle produces hairline to 1.25" spray patterns
  • Gravity-feed 7cc cup with vented anti-spill cover
  • Balanced precision body with needle backstop for consistent lines
  • Includes 7 exclusive downloadable airbrushing guides

Specifications

BrandPointZero
Craft TypeCraft Accessories
ColorSilver

Questions about this item

What comes in the PZ-260 box and what must I buy separately?

The set includes the airbrush with pre-installed 0.3 mm nozzle, needle, caps, 7 cc gravity cup, barbed hose connector, pipette, nozzle wrench, instruction sheet and 10 downloadable guides. You must supply an air source capable of 15 to 50 psi with a 1/8" BSP fitting.

Which nozzle size should I choose for fine detail versus broader coverage?

The PZ-260 ships with a single 0.3 mm nozzle installed; it produces spray patterns from hairline up to 1.25 inches. No alternate nozzle sizes are included, so choose this model when that range matches your work.

What does the 15 to 50 psi requirement mean for my compressor setup?

Your compressor must deliver a regulated working pressure between 15 and 50 psi at the airbrush. The 1/8" BSP fitting connects directly to the supplied barbed hose connector; ensure the regulator can hold steady pressure in that window.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.