We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft locking power cord with twist-lock NEMA L5-15P plug and C13 connector, SJT jacket

Cable Leader

Cable Leader 6 ft NEMA L5-15P to C13 Locking Power Cord 14 AWG 15A/125V Black

SKU CH-R0PD-KB7A0

Six-foot locking power cord with a twist-lock NEMA L5-15P plug and C13 connector, 14 AWG rated 15A/125V for secure server and PDU connections

  • Length6 ft.

Length 6ft

  • Secure twist-lock plug prevents accidental disconnection in racks
  • Heavy-duty 14 AWG copper handles 15 A at 125 V
  • SJT jacket rated 105 °C and 300 V for demanding environments
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Black jacket simplifies circuit identification in server cabinets

Secure Locking Connection

This six-foot power cord terminates in a NEMA L5-15P twist-lock plug and a C13 connector. The locking mechanism prevents accidental disconnection in racks or environments with vibration. It is built for servers, PDUs and equipment that draw power from locking outlets in data centres and server rooms. The black SJT jacket helps identify circuits at a glance.

Heavy-Duty Conductor Rating

The cord uses 14 AWG three-conductor grounded copper rated for 15 amps at 125 volts. The SJT jacket carries a 105°C temperature rating and a 300V cable rating. It holds UL Listing and CSA certification under file E210037 and is RoHS compliant. This gauge supports higher-draw equipment where lighter cords would be underspecified.

Sustained Rack Operation

Under continuous load the twist-lock plug maintains a firm seat so the connection does not work loose over time. The 14 AWG conductors handle the rated 15A without overheating within the 105°C jacket limit. The construction is intended for permanent installation in server cabinets and PDU strips rather than occasional desktop use. Buyers who need a non-locking C13 cord or a different gauge should select an alternative.

Highlights

  • Secure twist-lock plug prevents accidental disconnection in racks
  • Heavy-duty 14 AWG copper handles 15 A at 125 V
  • SJT jacket rated 105 °C and 300 V for demanding environments
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Black jacket simplifies circuit identification in server cabinets

Specifications

Length6 ft.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the NEMA L5-15P twist-lock plug into a PDU without damaging the locking mechanism?

Align the blades with the outlet slots, push firmly until seated, then twist clockwise until the lock clicks; the twist-lock design prevents accidental unplugging in racks.

Will the 14 AWG SJT jacketed cable need replacement after prolonged exposure to 105C operating temperatures?

The 14 AWG 3-conductor copper cable with SJT jacket is rated for 105C and 300V; inspect periodically for jacket cracking or discoloration in high-heat rack environments.

At what sustained load does the 15A/125V rating become the limiting factor for this locking power cord?

The cord is rated for continuous operation at 15A/125V; sustained loads above 15A will exceed the 14 AWG conductor capacity and UL-listed safety limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.