We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 8ft IEC C20 to C19 Heavy Duty Power Extension Cord 12 AWG 20A 250V Black

SKU CH-7XNF-H6HJ0

Extends C20-to-C19 power links by 96 inches with 12 AWG SJT copper rated 20A/250V, UL Listed

  • Length96 inches
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 250.00 volts; Current: 20 amps; Weight: 1.70 lb; Co

Length 8ft

Struck-through versions exist but are not stocked here.

  • Extends C20/C19 power reach with male C20 plug to female C19 socket
  • Heavy duty 12 AWG copper conductors rated 20A at 250V for server loads
  • IEC 60320 connectors standard across rack PDUs, UPS units and servers
  • Black SJT jacket aids circuit tracing and phase identification in dense racks
  • UL Listed and CSA certified file E210037 with RoHS compliance for safety assurance

Extension cord for C20/C19 rack power

This eight-foot extension cord connects a male IEC 60320 C20 plug to a female C19 socket, adding reach between a rack PDU, UPS or server and the equipment power cord. It is built for data-centre and server-room installations where the existing cable falls short of the power source. The heavy-duty SJT jacket and 12 AWG copper conductors are rated for continuous 20 A at 250 V. Buyers who need a different connector pairing or a longer run will need another cable.

Sustained-load behaviour with 12 AWG conductors

The 12 AWG three-conductor copper cable carries the full 20 A rating without overheating, supported by a 105 °C / 300 V insulation rating and UL listing (file E210037). Under continuous server or switch loads the SJT jacket resists abrasion and heat, keeping voltage drop low across the 96-inch length. Installations that exceed 20 A or require a higher temperature rating cannot use this cord.

Straightforward rack installation

The male C20 and female C19 ends mate directly with standard IEC 60320 inlets and outlets, so no adapters or tools are required. The black jacket helps technicians trace circuits and phases at a glance during rack wiring. The only common issue is ordering the wrong gender or length; verify the C20-to-C19 orientation and the 96-inch reach before installing.

Highlights

  • Extends C20/C19 power reach with male C20 plug to female C19 socket
  • Heavy duty 12 AWG copper conductors rated 20A at 250V for server loads
  • IEC 60320 connectors standard across rack PDUs, UPS units and servers
  • Black SJT jacket aids circuit tracing and phase identification in dense racks
  • UL Listed and CSA certified file E210037 with RoHS compliance for safety assurance

Specifications

BrandCable Leader
Length96 inches
Connector DetailMale-to-Female
SpecificationsVoltage: 250.00 volts; Current: 20 amps; Weight: 1.70 lb; Connector: Male-to-Female; UL Listed: true

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 12 AWG SJT jacket stay cool when the cord runs at 20 A all day?

The 12 AWG copper conductors are rated for 105 °C and 300 V, so normal 20 A / 250 V loads stay well within the thermal limits.

What must I already have to use this male C20 to female C19 extension?

A power source with a C20 inlet — such as a rack PDU or UPS — and a device or cord ending in a C19 plug.

Will the IEC 60320 C19 socket accept the C19 plug on my older server PSU?

Yes, the C19 socket follows the IEC 60320 standard used across servers, switches and AV gear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.