We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 5 ft power extension cord with C20 male plug and C19 female socket, thick SJT jacket

Cable Leader

Cable Leader 5ft IEC C20 to C19 12 AWG 20A 250V Black Power Extension Cord

SKU CH-P2DG-AP4T1

A 5 ft IEC C20 to C19 extension cord with 12 AWG conductors rated 20A/250V, UL Listed and CSA certified for server racks and PDUs

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge12 AWG

Length 5ft

Struck-through versions exist but are not stocked here.

  • Extends C20/C19 reach between PDU and equipment without adapters
  • Heavy-duty 12 AWG copper handles 20A at 250V for server loads
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • SJT jacket rated 105C/300V withstands data-centre temperatures
  • Black jacket simplifies circuit tracing in coloured rack installations

Extends C20 to C19 power

This five-foot extension cord adds reach between a rack PDU, UPS or server and an existing C19 cord. The male IEC 60320 C20 plug connects to the power source while the female C19 socket accepts the equipment cord. It is built for server, switch and AV gear installations where extra length is needed.

Heavy duty 12 AWG SJT construction

The cord uses 12 AWG three-conductor copper with an SJT jacket rated to 105C and 300V. The 20A, 250V rating supports heavy-duty 20A equipment loads in data-centre environments. A black jacket helps trace circuits and phases at a glance, and the assembly carries UL and CSA certification (file E210037) with RoHS compliance.

Practical limits of the C20/C19 interface

The C20/C19 pair is rated to 20A at 250V, so the cord cannot serve loads that exceed that current. Builders who need higher amperage or a different connector standard will need a separate solution. The five-foot length adds modest reach; longer runs require a different cable.

Highlights

  • Extends C20/C19 reach between PDU and equipment without adapters
  • Heavy-duty 12 AWG copper handles 20A at 250V for server loads
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • SJT jacket rated 105C/300V withstands data-centre temperatures
  • Black jacket simplifies circuit tracing in coloured rack installations

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge12 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What IEC 60320 connectors does this cord use and what current can it carry?

It uses a male C20 plug and female C19 socket rated for 20A at 250V.

What jacket type and temperature rating does the cable have for rack mounting?

SJT jacket rated 105C and 300V, suitable for server rack and PDU use.

How do you connect it to extend an existing C20/C19 run without an adapter?

Plug the male C20 into the PDU or UPS outlet, then insert your existing C19 cord into the female C19 end.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.