We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12-inch IEC C20 male to C19 female power extension cord with thick SJT jacket

Cable Leader

Cable Leader IEC C20 to C19 Power Extension Cord 12in 12AWG 20A 250V Black

SKU CH-CDAY-SDWFD

A 12-inch heavy-duty SJT 12 AWG extension cord with male C20 to female C19 connectors rated 20A/250V for rack PDU and server power links

  • Length12 inches
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 250.00 volts; Current: 20 amps; Weight: 0.38 lb; Co

Length 1ft

Struck-through versions exist but are not stocked here.

  • Extends rack power reach with 12-inch C20-to-C19 jumper
  • Heavy-duty 12 AWG copper handles 20 A at 250 V
  • SJT jacket rated 105 °C and 300 V for data-centre loads
  • Standard IEC 60320 connectors fit servers, switches and AV gear
  • UL Listed and CSA certified (file E210037), RoHS compliant

12-inch C20-to-C19 rack power extension

The Cable Leader cord adds 12 inches of reach between a C20 inlet on a PDU or UPS and the C19 plug on a server or switch power cable. It is built for IT staff and integrators who need a short, reliable jumper inside a rack without introducing adapters or extra bulk.

Heavy-duty 12 AWG SJT construction for 20 A loads

Three-conductor copper cable with a 105 °C / 300 V jacket carries the full 20 A at 250 V rating required by dense rack equipment. The UL Listed and CSA certified assembly (file E210037) fits standard IEC 60320 C20/C19 sockets, so it slots into existing power distribution without re-wiring or panel changes.

Replaces improvised daisy-chains

When the stock cable falls short of the PDU, this extension eliminates the need for makeshift couplers or longer runs that clutter cable managers. It is not suited for runs that exceed the 12-inch length or for connectors other than C20/C19.

Highlights

  • Extends rack power reach with 12-inch C20-to-C19 jumper
  • Heavy-duty 12 AWG copper handles 20 A at 250 V
  • SJT jacket rated 105 °C and 300 V for data-centre loads
  • Standard IEC 60320 connectors fit servers, switches and AV gear
  • UL Listed and CSA certified (file E210037), RoHS compliant

Specifications

BrandCable Leader
Length12 inches
Connector DetailMale-to-Female
SpecificationsVoltage: 250.00 volts; Current: 20 amps; Weight: 0.38 lb; Connector: Male-to-Female; UL Listed: true

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 12 AWG copper limit how much current I can draw continuously?

The cord is rated for 20 A at 250 V, so sustained loads up to that level are within specification.

Will the SJT jacket get hot or make noise when the cord runs all day at full load?

The heavy-duty SJT jacket is rated to 105 °C and carries no moving parts, so it stays silent and handles heat without degradation.

What connectors must my PDU and equipment already have for this extension to plug straight in?

You need a female C19 outlet on the power source and a male C20 inlet on the device, both standard IEC 60320 fittings.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.