We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 7-foot IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 7ft IEC C14 to C13 Power Extension Cord, 18 AWG SJT 10A/250V, Blue

SKU CH-44D4-JJ388

A 7 ft blue IEC C14-to-C13 power extension cord, 18 AWG rated 10A/250V, UL Listed and CSA certified for rack PDU or UPS connections

  • ColorBlue
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 7ft

Color Blue

  • Adds 7 ft of reach between PDU and device with male C14 to female C13 connectors
  • 18 AWG SJT cable rated 10A/250V handles server and rack loads safely
  • UL Listed and CSA certified (file E210037) meets data-center safety standards
  • Blue jacket enables quick circuit tracing in dense rack installations
  • Lifetime warranty from US-based Cable Leader brand covers replacement if cord fails

Rack-ready power extension

The Cable Leader 7 ft IEC C14 to C13 cord adds reach between a rack PDU, UPS or server power source and your existing C13 equipment cord. The male C14 plug connects to the source while the female C13 socket accepts the device cable, removing the need for an adapter in standard rack and data-centre installations.

Blue SJT jacket with safety ratings

An 18 AWG three-conductor copper core carries 10A at 250V inside an SJT jacket rated 105C and 300V. The blue colour helps trace circuits and phases at a glance, and the cable is UL Listed and CSA certified (file E210037) plus RoHS compliant for regulated environments.

Verify gauge and connector match

Confirm your existing cord ends in a C13 plug so it fits the female socket, and check that the 10A rating covers the connected load. If the equipment draws more current, a heavier gauge such as 16 AWG, 14 AWG or 12 AWG is required.

Highlights

  • Adds 7 ft of reach between PDU and device with male C14 to female C13 connectors
  • 18 AWG SJT cable rated 10A/250V handles server and rack loads safely
  • UL Listed and CSA certified (file E210037) meets data-center safety standards
  • Blue jacket enables quick circuit tracing in dense rack installations
  • Lifetime warranty from US-based Cable Leader brand covers replacement if cord fails

Specifications

BrandGENERIC
ColorBlue
Length5 - 10 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the IEC 60320 C14-to-C13 interface support in practice?

It extends a C14/C13 connection between a rack PDU, UPS or server and your existing cord, rated for 10 A at 250 V with 18 AWG copper.

What physical space does the 7 ft blue SJT jacket need for routing?

The 7 ft length and flexible SJT jacket route easily in server racks; the blue colour helps trace circuits and phases at a glance.

How do I install it and what step do people miss?

Plug the male C14 into the PDU or UPS, then seat your existing cord fully into the female C13 so the ground pin locks — partial insertion is the common error.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.