We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical fiberglass fuse, 76.2 mm long by 20.6 mm diameter, non-indicating time-delay type

Bussmann

Bussmann PON60 Midget Fuse Time-Delay 60A 250V AC Non-Indicating

SKU CH-CXD7-M6G0K

Time-delay midget fuse rated 60 A at 250 V AC with 10 kA interrupt capacity and 76.2 mm cylindrical fiberglass body

  • Time-delay protection handles motor-start surges with 60 A rating
  • 10 kA interrupt rating at 250 V AC clears faults safely
  • Cylindrical 76.2 mm x 20.6 mm fiberglass body fits midget fuse holders
  • Dual-element design provides overload and short-circuit response
  • CE and CSA C22.2 No. 59.1 certified for code compliance

60 A Time-Delay Midget Fuse

The EATON BUSSMANN PON60 is a cylindrical, non-indicating fuse rated at 60 A and 250 V AC with a 10 kA interrupt rating. It suits industrial control panels, motor circuits and generator supplies that need a time-delay characteristic to ride through inrush currents.

Fits Standard Midget Clips

The 76.2 mm by 20.6 mm fiberglass body slides into common midget fuse blocks without tools. The non-rejection design means it will seat in any clip that accepts the PON or OTN series, so polarity or keying errors are not a concern during replacement.

250 V AC Limit and Non-Indicating Body

The fuse is certified to CSA C 22.2 No. 59.1 and CE for 250 V AC maximum; it must not be applied on higher voltage or DC systems. Because the body does not show a visual open-circuit flag, technicians must test electrically to confirm a blown element.

Highlights

  • Time-delay protection handles motor-start surges with 60 A rating
  • 10 kA interrupt rating at 250 V AC clears faults safely
  • Cylindrical 76.2 mm x 20.6 mm fiberglass body fits midget fuse holders
  • Dual-element design provides overload and short-circuit response
  • CE and CSA C22.2 No. 59.1 certified for code compliance

Specifications

BrandEATON BUSSMANN

Questions about this item

How can I verify the fuse is working after installation?

A continuity test across the 20.6 mm diameter cylindrical body with a multimeter will confirm the element is intact; the 10 kA interrupt rating at 250 V AC is only proven under fault conditions.

What comes in the box and what must I source separately?

The package contains the single PON60 fuse with its 76.2 mm long fiberglass body; you must provide a compatible midget fuse holder or block rated for 60 A at 250 V AC.

Which version should I choose for my application?

Select the PON60 when you need a 60 A, 250 V AC time-delay, non-indicating fuse with a 10 kA interrupt rating and the standard 76.2 mm x 20.6 mm cylindrical dimensions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.