We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical white melamine fuse, 60A 600V Class J

Bussmann

Bussmann DFJ-60 Class J Fast-Acting Fuse 60A 600V AC

SKU CH-HGY5-7A2K4

Class J fast-acting fuse rated 60 A at 600 V AC with a 200 kA interrupt rating

  • Fast-acting protection clears faults quickly
  • 60 A rating matches 600 V AC circuits
  • 200 kA interrupt rating at 600 V AC
  • 100 kA DC interrupt rating at 450 V DC
  • Class J design fits CH60J and JM600 blocks

60 A Class J Fast-Acting Fuse

The Bussmann DFJ-60 is a 60 A, 600 V AC Class J fuse designed for fast-acting overcurrent protection in electrical distribution systems. Its cylindrical melamine body measures 2-3/8 in length by 1-1/16 in diameter and fits non-rejection fuse blocks. The single-element construction provides a 200 kA interrupt rating at 600 V AC and 100 kA at 450 V DC.

Suits 60 A Class J circuits needing fast response

This fuse suits panels and equipment requiring a 60 A Class J fast-acting link with high interrupt capacity. It is not for circuits needing time-delay characteristics to ride through motor inrush or transformer magnetising current. Buyers who need visual indication of a blown element should select an indicating model instead.

Simple cylindrical insertion into compatible blocks

Installation consists of inserting the cylindrical body into a matching Class J non-rejection block such as the CH60J, JM600, JT600 or JTN600 series. Ensure the block is rated for the available fault current and that the fuse orientation matches the holder. The most common error is fitting the fuse into a rejection-style block that physically rejects the non-rejection blade design.

Highlights

  • Fast-acting protection clears faults quickly
  • 60 A rating matches 600 V AC circuits
  • 200 kA interrupt rating at 600 V AC
  • 100 kA DC interrupt rating at 450 V DC
  • Class J design fits CH60J and JM600 blocks

Specifications

BrandEATON BUSSMANN

Questions about this item

What fuse block series will accept the 2-3/8 in by 1-1/16 in cylindrical body of this DFJ-60 fuse?

Compatible fuse block series include CH60J, JM600, JT600 and JTN600, which are designed for the non-rejection style body of this Class J fuse.

Can this 60 A Class J fuse protect circuits that also use older 600 V AC equipment rated for lower interrupting capacity?

Yes, the 200 kA interrupt rating at 600 V AC provides ample margin for legacy gear with lower withstand ratings, while the 100 kA rating at 450 V DC covers older DC systems.

How can I verify the fuse is intact after installation without an indicating feature?

Use a multimeter to measure continuity across the fuse terminals; a low resistance reading confirms the single element is intact and the fuse is ready to protect the circuit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.