We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open single-pole copper power block with dual line and load connections, surface-mount base

Bussmann

Bussmann 16500-1 Power Distribution Block 1 Pole 620 A Copper

SKU CH-YDFG-01V3S

Single-pole copper power distribution block rated 620 A at 600 V with two line and two load connections for 6 AWG to 350 kcmil conductors

  • Engine BrandEATON BUSSMANN
  • Handles high loads with 620 A copper rating
  • Connects large cables up to 350 kcmil
  • Works at 600 V for industrial power
  • Single-pole open block simplifies wiring layout
  • Compact 2.89 in depth fits tight panels

Power Distribution Block 620 A Copper

The Bussmann 16500-1 is a single-pole power distribution block rated for 620 A with copper conductors. It accepts copper or aluminium wire from 6 AWG up to 350 kcmil on both line and load sides, providing two connections per pole. The open-design unit mounts on a surface and operates at up to 600 V with an overall depth of 2.89 in.

Suits single-pole high-current distribution

This block suits panels that need to split or join heavy copper feeds in a single-pole arrangement. It is not for installers who require multiple poles in one housing, or for systems that demand a higher voltage rating than 600 V. Buyers needing integral stud terminations or a different mounting style should look at other configurations.

620 A copper rating decides fit

The 620 A maximum current with copper conductor is the figure that determines whether this block matches the load. If the circuit calls for a higher ampacity or a lower maximum wire size, another block must be chosen.

Highlights

  • Handles high loads with 620 A copper rating
  • Connects large cables up to 350 kcmil
  • Works at 600 V for industrial power
  • Single-pole open block simplifies wiring layout
  • Compact 2.89 in depth fits tight panels

Specifications

Engine BrandEATON BUSSMANN

Questions about this item

How do I install the 16500-1 block and which step is commonly missed?

Surface-mount the single-pole block, then terminate up to two line and two load conductors per pole in the 6 AWG to 350 kcmil range, torquing each set-screw to the manufacturer's specified value — the step often skipped is verifying torque on every connection.

What maintenance or replacement will the 16500-1 block need over time?

Periodically inspect all set-screw terminals for discoloration or looseness and re-torque to spec; replace the block if any connector shows heat damage, cracking, or can no longer hold 6 AWG to 350 kcmil conductors securely.

At sustained loads, what limit of the 16500-1 block is reached first?

The 620 A copper-conductor rating is the first hard limit; continuous operation above that current will overheat the terminals before the 600 V insulation rating becomes a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.